Xinxiang Magicart Cranes Co., LTD |
Verified Suppliers
|
|
Boat Hoist, Yacht Crane, Travel Lift
Marine Traveling Lift Boat Hoist Yacht crane
Product Description
Yacht handling crane is designed according to the user's requirements, and is used to transport various hulls, with the maximum weight of 30-1200 tons.
The yacht handling crane can store the ship on the shore to ensure that it is very easy to maintain and repair these facilities and reduce the cost of ship maintenance.
Three key design points of yacht crane:
One of the key points - the maximum load exceeds the rated load by 120%: it ensures that it is very safe to lift the yacht within the load weight. The lifting of equipment exceeding the rated load is limited, so even if the machine itself has an error in estimating the yacht tonnage, the equipment will not be forced to lift, so as to avoid overweight accidents
The second key point is the independent and controllable lifting point position, which is lifted according to the yacht lifting point and operated precisely: its design meets the requirements of the ship type design, the lifting point position is marked on the ship hull, which is easy to operate, and each lifting point can be adjusted independently to control the sling distance and hull levelness.
The third key point - supporting and non extruding yacht: the sling lifting method is similar to supporting the hull, without extruding the hull, and without extruding the hull by ordinary single arm cranes.
In addition, the yacht crane has many advantages: it does not occupy the row, and the row cost is low; Cooperate with movable ship frame to facilitate construction; Small support contact area, no displacement; In this way, it is safe, fast and economical.
Drawing and Specification
Model | Capacity | Clear Height | Clear Width |
DB 10 | 10T | 2m~9m | 3m~12m |
DB 20 | 20T | 2m~9m | 3m~12m |
DB 30 | 30T | 2m~9m | 3m~12m |
DB 50 | 50T | 2m~9m | 3m~15m |
DB 70 | 70T | 2.5m~12m | 3m~15m |
DB100 | 100T | 2.5m~12m | 3m~15m |
DB150 | 150T | 3m~15m | 3m~18m |
DB200 | 200T | 3m~15m | 3m~18m |
DB250 | 250T | 3m~15m | 3m~18m |
DB300 | 300T | 5m~20m | 5m~25m |
DB400 | 400T | 5m~20m | 5m~25m |
| Customized | Customized | Customized |
Main Features
1. For the crane traveling, this crane can move in diagonal direction, this boat and yacht handling crane also can steer in 90 degree and put the boat in any designated position according to requirements.
2. This crane can be adjusted the width of the main girder according to the boat in case to handling different side boat.
3. This yacht handling crane is of low expense, high performance, easy to operate and maintenance and so on. 4. Low cost on the daily operation, it adopts the soft and firm belt to ensure there is no harm to the boat when hoisting.
Environmental Conditions
1. The power source is three-phase alternating current,rated
frequency is 50HZ,rated voltage is 380V.
2. The working environment temperature ranges from -20℃ to +45℃ and
the relative humidity is no lower than 95%(with dew).
3. In-service, the wind speed should be no higher than 20m/s;
out-of-service, the wind speed should be no higher than 44m/s.
4. The working class is A6-A7.
5. The gradient of crane traveling floor should be less than 1% and
part of that should be no more than 3%.
6. The crane which has the special requirement for working
conditions, can be manufactured following the contracts.
Package and Delivery
Typical Project
Installation and Commissioning
Product Certificate
1. Is your product customized?
Thanks for your question. Yes, because the working condition are
different, all our products are customized depending on detail
requirement! So if you give us more information about the lift
capacity, span, lift height, power source and other specials, we
will give you a very quick and accurate quotation.
2. What’s the information should I provide when inquiry?
Thanks for your question. The more information you provide, the
accurate solution we can prepare for you! The information such as
the lift capacity, span, lift height, power source or other
specials you give us will be more appreciated.
3. How many operating methods for my selection?
Thanks for your question. The standard operating methods we provide
is pendent controller with push buttons. Meanwhile, we can also
provide the remote control with push buttons and the cabin (space
capsule seat) control with joystick. You can choose any of them,
just tell us!
4. What’s the max lifting capacity of the crane?
Thanks for your question. The max Lifting capacity of our standard
crane are up to 450 ton. If this can’t satisfy your working
requirement. Please contact us for special customized.
5. The space of my workshop is limited, can the crane ok for mine?
Thanks for your question. For low headroom workshop, we have the
Special products. The detail dimension please consult our
professional engineer.
6. Can the crane work in hazardous environment?
Thanks for your question. This type product is just for application
in general manufacturing workshop. For hazardous environment,
please consult our professional sales manager.
7. Do your side can provide lift tools?
Thanks for your question. Yes, we can provide any kinds of lift
tools such as lift sling belt, lift clamp, grab, magnet or other
specials as your requirement's.