Active Member
|
[China]
Address: 13floor fuqiao Industrial Estate,Fuyong Town,Baoan District,Shenzhen,China
Contact name:Joe
Shenzhen Guangyufeng Rubber Co ,. Ltd. |
|
|
Non Halogen Fire Retardant Heat Shrinkable Sleeve
Product Information:
LRS-1 is environmental friendly, flame retardant and halogen free.It is widely used for insulation, anti-corrssion, protection and color coding etc.
Product Application:
1 Wire splices and terminations
2. Jacketing of Wire harnesses
3 Mechanical protection and fire-resistant covering
4 Insulation and strain relief of terminals and connections
Product Features:
1. Operating Temperature:-55~ 125 centi degree;
2. Shrinking Temperature:Start at 70 centi degree,and shrunk
totally at 110centi degree
3. halogen free, flexible,flame retardant;
4. Certificate: SGS test, Rohs, UL, Reach, ISO.
5 Standard color:black,white,red,yellow,green,blue, more colors available upon
request
Specification Catalogue:(Size Chart)
| Specification | Before shrinkage(mm) | After shrinkage(mm) | Packaging | |
| Inner Diameter-D | Inner diameter-d | Thickness-t | m/roll | |
| φ0.8 | 1.2±0.3 | 0.4±0.1 | 0.30±0.05 | 200 |
| φ1.0 | 1.4±0.3 | 0.4±0.1 | 0.35±0.05 | 200 |
| φ1.5 | 1.9±0.3 | 0.6±0.1 | 0.35±0.05 | 200 |
| φ2.0 | 2.4±0.3 | 0.9±0.1 | 0.40±0.05 | 200 |
| φ2.5 | 2.9±0.3 | 1.10±0.1 | 0.40±0.05 | 200 |
| φ3.0 | 3.4±0.3 | 1.4±0.1 | 0.40±0.05 | 200 |
| φ3.5 | 3.9±0.3 | 1.6±0.1 | 0.40±0.05 | 200 |
| φ5.0 | 5.4±0.3 | 2.3±0.2 | 0.50±0.05 | 100 |
| φ6.0 | 6.4±0.4 | 2.8±0.2 | 0.50±0.05 | 100 |
| φ7.0 | 7.4±0.4 | 3.3±0.2 | 0.55±0.05 | 100 |
| φ8.0 | 8.4±0.4 | 3.8±0.2 | 0.55±0.05 | 100 |
| φ9.0 | 9.4±0.4 | 4.3±0.2 | 0.55±0.05 | 100 |
| φ10.0 | 10.5±0.4 | 4.8±0.2 | 0.55±0.05 | 100 |
| φ11.0 | 11.5±0.4 | 5.3±0.2 | 0.55±0.05 | 100 |
| φ12.0 | 12.5±0.4 | 5.7±0.3 | 0.55±0.05 | 100 |
| φ13.0 | 13.5±0.4 | 6.2±0.3 | 0.55±0.05 | 100 |
| φ14.0 | 14.5±0.4 | 6.7±0.3 | 0.55±0.05 | 100 |
| φ15.0 | 15.5±0.5 | 7.2±0.3 | 0.55±0.05 | 100 |
| φ16.0 | 16.5±0.5 | 7.7±0.3 | 0.55±0.05 | 100 |
| φ17.0 | 17.5±0.5 | 8.2±0.3 | 0.55±0.05 | 100 |
| φ18.0 | 19±0.5 | 8.7±0.3 | 0.60±0.05 | 100 |
| φ20 | 21.0±0.5 | 9.7±0.3 | 0.60±0.05 | 100 |
| φ22 | 22.8±0.8 | 10.0±1.0 | 0.60±0.05 | 25 |
| φ25 | 25.8±0.8 | 11.0±1.0 | 0.65±0.05 | 25 |
| φ28 | 28.8±0.8 | 13.0±1.0 | 0.65±0.05 | 25 |
| φ30 | 30.8±0.8 | 14.0±1.0 | 0.70±0.05 | 25 |
| φ35 | 35.0±0.8 | 16.0±1.0 | 0.70±0.05 | 25 |
| φ40 | 41.0±1.0 | 19.0±1.0 | 0.75±0.05 | 25 |
| φ50 | 51.0±1.0 | 24.0±1.0 | 0.80±0.05 | 25 |
| φ60 | 61.0±1.0 | 29.0±1.0 | 0.80±0.05 | 25 |
| φ70 | 71.0±1.0 | 33.0±2.0 | 0.85±0.05 | 25 |
| φ80 | 81.0±1.0 | 37.0±2.0 | 0.90±0.05 | 25 |
| φ90 | 91.0±1.0 | 43.0±2.0 | 0.95±0.05 | 25 |
| φ100 | 102.0±2.0 | 48.0±2.0 | 1.00±0.05 | 25 |
| φ120 | 122.0±2.0 | 58.0±2.0 | 1.10±0.05 | 25 |
| φ150 | 152.0±2.0 | 73.0±2.0 | 1.10±0.05 | 25 |
| Notes: Other specifications can be offered as requested. | ||||
| Technical data sheet | |||
| Description | Test Methods | Values | |
| Physical | Tensile strength(Mpa) | GB/T1040 | ≥12 |
| Breakage elongation rate(%) | ≥200 | ||
| Tensile strength(Mpa) | UL224 158°C*168hr | ≥10 | |
| Breakage elongation rate(%) | ≥200 | ||
| Low temperature flexibility | (-40°C x 4h) | No cracking | |
| Electrical | dielectric strength(KV/mm) | GB/T1408 | ≥15 |
| Voltage resistant | UL224 | 2.5KV No breakdown | |
| volume resistivity(ohm.cm) | GB/T1410 | ≥1*1014 | |
| Chemical | Anti-corrosive performance | UL224 158°C*168hr | Pass |
| Copper stability | Pass | ||
| Fire resistant | UL224 | VW-1 | |
Packaging and shipping:
Packaging: 200m/roll, 100m/roll, 50m/roll, 1.22m/roll etc. (Can be packed or cutted as request)
Shipping:By express(Samples), by air, by sea(Large volume)
Our Services
We lead the company to quality and rich experience in the silicone
rubber manufacturing industry. Apply best practices and
leading edge technology and strict internal control,rapid response
with the customers. That enables our customers to order planning
and we have the confidence, will the expectations of their
time in the right quality standards;
2. We provide one-stop service, from the mold design - > 3 d
drawings, sample - > tools - >initial quality control to make
the customer to confirm the sample - > batch - > - >
the second process - > silk printing (if required) - >
the second packaging quality control - >- > delivery;
3. Our sales and marketing team and engineer team professional, friendly request timely response;Precision mold design and production of absolutely conforms to the mobile phone shell
4. The quality of the good reputation for our long-term
relationship with customers;
5. The price is negotiable. We are constantly trying to find ways
to minimize the cost of production cost savings for customers;
6. Our factory own CNC processing center, molding machine (from 200
tons to 300 tons), silk printing machine, etc.
