|
[China]
Trade Verify
Address: No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China
Contact name:Amy Tse
MINGCHENG GROUP LIMITED |
|
Verified Suppliers
|
|
|
Easy to Use 1: 1 Mix Ratio Silicone Mold Putty for Casting DIY Molds and Jewelry Making
Introduction
Silicone Putty is ideal for a wide range of impression type mold applications, including Castin’Craft Clear Casting Resin, EasyCast Clear Casting Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals! EasyMold is a easy to use, Odor Free, Non-Toxic, FDA compliant – Food Grade, two component silicone putty.
Physical Properties:
| Before Curing | Catalyst Components | Base Components |
| Appearance | White putty | Purple putty |
| Mix ratio | 1:1 | |
| Pot life | 3-5 minutes | |
| Curing time(37C) | <30 minutes | |
| After Curing | ||
| Hardness(Shore A) | 40 | |
| Permanent deformation % | <0.2% | |
| Dimensional stability % | <0.25 | |
| Copy details(μm) | <1.5 | |
| Tearing Strength Mpa4 | .0 | |
| Temperature stability | 60°C for 1 week | |
| Elongation% | 350 | |
Application
It is suitable for the production of casting molds for jewelry, precise dental crown, dental fixed bridge, hoof care,etc.
Usage Instruction
1. Under the room temperature, take the same amount of base component (blue) and catalyst component (white).
2. Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component.
3. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.
4. Close the lid immediately
after usage, the cover can not be interchanged.
Main Feature
1. Good plasticity, small volume incorporation rate, it needs only 3-5min to vulcanize into elastomer at oral temperature, very easy to remove from the mouth after the stamp, and has good chemical stability.
2. High accuracy of mold impression, capability of reproducing the fine structure of the mouth, with good elastic recovery, and good tear strength and dimensional stability, it can provide accurate and reliable morphological basis for clinical dentistry.
3. It has compatibility with almost all model materials, reusable for a period of time and can be sterilized.
Package
500g, 1kg, 5kg, 10kg, 25kg
Precautions
1. Do not use natural rubber gloves. It is recommended to use disposable polyethylene plastic gloves.
2. The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use.
3. Close the lid tightly and immediately after use, keep it in cool place, and be refrigerated in summer.
4. The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature.
5. It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure.
