Ecopower(Guangzhou) New material Co.,limited |
|
Water White and Good Heat Stability Hydrogenated C9 Hydrocarbon Resin in EVA
Type: HY - 9100
Product Model: C9 Hydrogenated Petroleum Resin
Description
Hydrogenated C9 petroleum resin is made by using the catalyst to
polymerize monomers, which are contained in a C9 fraction with or
without the help of a non phenolic regulator.
During the process of polymerizing, we can use the a boron
trifluoride ether complex or a boron trifluoride as the
non-phenolic catalyst. And the resin produced by this process
attains the boiling point which is higher than indene.
Specifications
Test Item | Test Range | Test Method |
Appearance | White Granular | Eyeballing |
Color Gardner | 0 , 1 | GB12007.1 |
Yellowness Index | <3 3.0 - 4.5 7.0 - 9.5 | - |
Softening Point ( ℃ ) | 95 - 105 | GB2294 ( Ring Ball ) |
Acid Value ( KOH mg / g ) | ≤ 1 | GB2895 |
Ash Content ( wt % ) | ≤ 0.1 | GB2295 |
Application
This type of C9 hydrogenated hydrocarbon resin exhibits good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate (EVA) and styrene block copolymers.
It shows good compatibility with EVA,which can get clear EVA adhesive system.
hydrogenated C9 hydrocarbon resin also can improve the prodcuts intial viscosity and peel strength.
Packing and Storage
1. Packing : 25kg / Paper bag.
2. Storage : Kept in a low temperature, dry and ventilated place, avoid direct sunlight.
3. Shelf life : One year in ventilating, cool and dry area.