Ecopower(Guangzhou) New material Co.,limited |
|
Cas No. 69430-35-9 Tackifier Resin Dicyclopentadiene Resin For Hot Melt Adhesive
Product Name : DCPD (Dicyclopentadiene) Resin
Type : HY - DCPD120
CAS No. : 69430-35-9
Description
It’s a granular solid with the white color, it has the properties of good glossiness, mutual solubility, water resistance, insulation and very good chemical stability over acid and alkali, and good adhesive strength and holt heat conduction, etc. It's very widely in many industries.
Properties
It is white thermoplastic resin obtained from polymerization and hydrogenation of cyclic ingredients.
Specifications
Test Item | Specification |
Appearance | White Granule |
Softening Point(℃) | 110-120 |
Acid Value(KOH mg/g) | ≤1 |
Color (Garden) | ≤1 |
Ash Content % | <0.1 |
Melt Viscosity(180℃ cps) | ≥370 |
Application
1. It is used as tackifier for hot melt adhesive(HMA)
2. It is used as hot melt pressure sensitive adhesive(HMPSA)
3. It is used as solvent based pressure sensitive adhesive(SBPSA)
4. It can be used in sanitary goods, such as diaper and sanitary napkins.
5. It has good compatibility with epoxy resin in ester solvent and has good curing rate to epoxy resin. It can be used as modifier.
6. It can reduce the cost of coatings, reduce the shrinkage force of epoxy resin, improve the adhesion of coatings, improve the permeability of coatings to cement and steel, enhance the wettability of pigments.
7. Add to the ink can play exhibition color, quick-drying, brightening effect, improve printing performance and so on.
Packing and Storage
1. Package: 25kg Paper bag.
2. Storage: Kept in a low temperature, dry and ventilated place,
avoid direct sunlight.
3. Shelf life: One year in ventilating, cool and dry area.