Active Member
|
[China]
Address: Tianhe District,Guangzhou City,China
Contact name:Info
SiKon Automation (Guangzhou) Co.,Ltd. |
|
|
| Cylinder type sensing head size | M18 |
|---|---|
| Type | Shielded |
| Sensing method | Inductive type |
| Sensing distance | 7 mm -10% to +10% |
| Setting distance | 0 to 5.6 mm |
| Differential distance | 10% Max. of sensing distance |
| Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
| Standard sensing object | Iron 18*18*1mm |
| Response frequency | 0.5 kHz (average) |
| Power supply voltage | 12 to 24 VDC (ripple(p-p) :10% Max.) |
| Operating voltage range | 10 to 30 VDC |
| Leakage current | 0.8 mA Max. |
| Control output (Output type) | DC 2-wire models with polarity |
| Control output (Switching capacity) | 3 to 100 mA |
| Control output (Residual voltage) | 3 V Max. (under load current with cable length of 2m) |
| Indicator | Operation indicator(red), Operation setting indicator(green) |
| Operation mode | NO |
| Protective circuit | Surge suppressor Output short-cut protection |
| Standard or Different frequency | Standard |
| Ambient temperature | Operating: -25 to 70 CEL Storage: -40 to 85 CEL (with no icing or condensation) |
| Ambient humidity | Operating: 35 to 95 %RH Storage: 35 to 95 %RH (with no condensation) |
| Temperature influence | +-10% Max. of sensing distance in temperature range of -25 to
+70CEL (As the basis for sensing distance of 23CEL) |
| Voltage influence | +-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | 50 M OHM Min. at 500VDC between charged parts and the case |
| Dielectric strength | 1000 VAC 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 1000m/s2 for 10 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP67 |
| Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-1 EN60947-5-2 |
| Applicable standard (EC Directive (EMC Directive)) | EMI: EN60947-5-2 Emission Enclosure: CISPR11 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Conducted Disturbance: IEC61000-4-6 Immunity Burst: IEC61000-4-4 CE marking: Equipped |
| Applicable standard (CCC mark) | Not equipped |
| Connection method | M12 connector models |
| Weight (Packed state) | approx. 40 g |
| Material (case) | Brass nickel plating |
| Material (sensing surface) | PBT |
| Material (clamping nuts) | Brass nickel plating |
| Material (toothed washer) | Iron zinc plating |
| Accessories | Instruction manual |
We could SUPPLY:
Relation Items:
| E2E-X2E2-M1-Z |
| E2E-X2E2-Z |
| E2E-X2F1 |
| E2E-X2F1 |
| E2E-X2F1-M1 |
| E2E-X2F1-M1J |
| E2E-X2F1-M1-Z |
| E2E-X2F1-R |
| E2E-X2F1-Z |
| E2E-X2F2 |
| E2E-X2F2 |
| E2E-X2F2-M1 |
| E2E-X2F2-M1J |
| E2E-X2F2-Z |
| E2E-X2ME1 |
| E2E-X2ME1 |
| E2E-X2ME1-M1 |
| E2E-X2ME1-M3 |
| E2E-X2ME1-M3-Z |
| E2E-X2ME1-R |
| E2E-X2ME1-Z |
| E2E-X2ME2 |
| E2E-X2ME2 |
| E2E-X2ME2-M1 |
| E2E-X2ME2-M3 |
| E2E-X2ME2-Z |
| E2E-X2MF1 |
| E2E-X2MF1 |
| E2E-X2MF1-M1 |
| E2E-X2MF1-M3 |
| E2E-X2MF1-M3-Z |
| E2E-X2MY1 |
| E2E-X2MY1 |
| E2E-X2MY1-Z |
| E2E-X2MY2 |
| E2E-X2MY2 |
| E2E-X2MY2-Z |
| E2E-X2Y1 |
| E2E-X2Y1 |
| E2E-X2Y15 |
| E2E-X2Y15 |
| E2E-X2Y1-M1 |
| E2E-X2Y1-Z |
| E2E-X2Y2 |
E2E-X2Y2 |
| E2E-X3D15S |
| E2E-X3D18-M1TGJ-T |
| E2E-X3D1-M1 |
| E2E-X3D1-M1G |
| E2E-X3D1-M1GJ |
| E2E-X3D1-M1GJ-T |
| E2E-X3D1-M1GJ-Z |
| E2E-X3D1-M1G-T |
| E2E-X3D1-M1G-T1 |
| E2E-X3D1-M1G-Z |
| E2E-X3D1-M1J |
| E2E-X3D1-M1J-T |
| E2E-X3D1-M1J-T1N |
| E2E-X3D1-M1TGJ |
| E2E-X3D1-M1TGJ-T-Z |
| E2E-X3D1-M1TGJ-U |
| E2E-X3D1-M1TGJ-U-Z |
| E2E-X3D1-M1-Z |
| E2E-X3D1-N |
| E2E-X3D1-N |
E2E-X3D1-N-Z |
| E2E-X3D2-N-Z |
| E2E-X3D2-U |
| E2E-X3D2-U-Z |
| E2E-X3T1 |
| E2E-X3T1 |
| E2E-X3T1-Z |
| E2E-X4B1D8 |
| E2E-X4B28 |
| E2E-X4C18 |
| E2E-X4C28 |
| E2E-X4MB1D8 |
| E2E-X4MB28 |
| E2E-X4MC18 |
| E2E-X4MC28 |
| E2E-X4MD1 |
| E2E-X4MD1-M1 |
| E2E-X4MD1-M1G |
| E2E-X4MD1-M1G-Z |
| E2E-X4MD1-M1-Z |
| E2E-X4MD1-M3G |
| E2E-X4MD1-M3G-Z |
| E2E-X4MD1-R |
| E2E-X4MD1S |
| E2E-X4MD1-Z |
| E2E-X4MD2 |
| E2E-X4MD2-M1 |
| E2E-X4MD2-M1G |
| E2E-X4MD2-M1G-Z |
| E2E-X4MD2-M3G |
| E2E-X4MD2-M3G-Z |
| E2E-X4MD2-Z |
| E2E-X50MB1DL30 |
| E2E-X5E1 |
| E2E-X5E1 |
