Home Companies Shenzhen Greetwin Technology Co.,Limited

Office Cell Phone Signal Boosters PICO Repeater Large Area 200㎡ - 500㎡

Shenzhen Greetwin Technology Co.,Limited
Active Member

Contact Us

[China] country

Contact name:Albert

Inquir Now

Shenzhen Greetwin Technology Co.,Limited

Office Cell Phone Signal Boosters PICO Repeater Large Area 200㎡ - 500㎡

Country/Region china
City & Province shenzhen guangdong
Categories Other Security & Protection Products
InquireNow

Product Details

Office Cell Phone Signal Boosters PICO Repeater Large Area 200㎡ - 500㎡

 

 
PICO Repeater Description:

Cell phone Signal booster help end users to improve mobile signals for much better phone call quality and smoother data transmission.

Can we not use mobile phones? The answer is definitely NO. But it might be much more miserable that the communication can’t be achieved due to no or weak signals though there is a mobile phone.

How to solve the problems?
Best Solution:
Plug & play: Purchase a set of booster solution and install it at your home, offices, and plug on the power and immediately you would be able to enjoy the full bar and high quality signals!

 

The repeater improves mobile signals with no negative impact on human health.
 

PICO Repeater Features:

1. Cost effective solution for weak signal zones, reduce drop/off calls.

2. Compact size, low power consumption,

3. easy installation, great cover.

4. Expansion and extending of the signal of base station.

5. Optimization of the quality of the signal and source

6. Cover about 200~500m² without block or obstruct.

7. High linear design, ALC function design, low interference to BTS.

8. Support any cellular devices (voice & data & video)

9. Wide band signal booster, or customize selective band booster.

10. can customize other system CDMA800/GSM850,GSM900, EGSM, DCS1800, PCS1900,WCDMA,etc

11. Plastic case, very good cooling system.

 

PICO Repeater Advantages:

1. can customize the middle Cover Image on the Booster,  design private styles

2. LED Display Panel, Intelligent mode setting
Smart function called which can be activated via the LED display panel.
Users can check working situation by LED Digital Panel.

      Install the repeater simple and efficient.

 

      3. Full set package, beautiful design.

      1) 1 X Signal Booster
      2) 1 X High Gain small directional Panel antenna.

           High Gain 9dBi outdoor directional Panel antenna(optional) 
      3) 1 X Indoor 2.5dBi Omni Whip antenna
      4) 1 X 12 meter coaxial cable
      5) 1 X 100-240V AC power adapter for the Booster unit
      6) 1 X English User's Manual

 

        4. Plastic case, very low weight, lower freight.

 

Signal Strength LED

Clear view of the signal strength, will know strong or weak.

MAX signal strength are 5 bars.

MIN signal strength are 0 bars.

DC 5V LEDPower supply DC 5V , When high voltage or low voltage, the "DC 5V" will flash.
ALC LED

The 30dB ALC is used for maintaining steady output power.

When ALC 5-10dB, “ALC LED” will flash.

ISO LED

Isolation function.

When the repeater have self oscillation or put antenna in wrong position,

the "ISO LED" will flash. Booster will auto shut down.

Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.
 

PICO Repeater Specification.

 

Frequency RangeUplinkDownlink
GSM850824- 849MHz869-894MHz
Max. Gain60dB65dB
Max. Output Power13dBm17dBm
Band widthWide Band
Manual Gain Control31dB / 1dB Step
Automatic Gain Control>30dB
Ripple in BandCDMA,GSM≤6dB; DCS,PCS≤8dB;
Noise Figure≤ 6dB
VSWR≤ 2.0
Intermodulation Products9KHz~1GHz≤ -36dBm
1~12.75GHz≤ -30dBm
Spurious Emission9KHz~1GHz≤ -36dBm
1~12.75GHz≤ -30dBm
Time Delay≤ 1.5 μs
Frequency stability≤ 0.01ppm
MTBF> 50000 hours
Impedance50 ohm
Power SupplyAC 90-264V,DC 5V/2A
Power LEDPower indicator
Signal Strength LED

Clear view of the signal strength, will know strong or weak.

MAX signal strength are 5 bars.

MIN signal strength are 0 bars.

DC 5V LEDPower supply DC 5V , When high voltage or low voltage, the "DC 5V" will flash.
ALC LED

The 30dB ALC is used for maintaining steady output power.

When ALC 5-10dB, “ALC LED” will flash.

ISO LED

Isolation function.

When the repeater have self oscillation or put antenna in wrong position,

the "ISO LED" will flash. Booster will auto shut down.

Mechanical Specification
RF ConnectorSMA-Female
SwitchPower Switch
CoolingHeatsink Convection cooling
Humidity< 90%
Operating Temperature-20°C ~ +55°C
Environment ConditionsIP40
Installation TypeWall Installation
Size120*111*21mm
Weight< 0.6Kg

 

How does the Booster benefit you?
Reduce drop calls and improve voice communication quality.
Speak and be heard clearly on your cell phone without feeling dropped down.
Stay Connected ... Wireless.
Complete Systems are Easy to Install.
 

PICO Repeater Application Diagram:

Hot Products

Vehicle Cell Phone Signal Boosters GSM DCS Repeater 12V 2A Light Weight For stranded motorists and ...
Waterproof Outdoor Wall Mounted Mobile Phone Signal Enhancer for Signal Repeater Signal Repeater ...
3G WCDMA Cell Phone Signal Boosters Kit Cellular Repeater Outdoor Omni Antenna Installing the ...
Communication Omni Antenna Ceiling Mount Antenna for 2G 3G 4G Repeater Model: GW-CA80253d Ceiling ...
Office Cell Phone Signal Boosters PICO Repeater Large Area 200㎡ - 500㎡ PICO Repeater Description: ...
4G LTE 700 Analogue Mobile Phone Signal Booster for Home Water Resistance Mobile Phone Signal ...