Home Companies Shenzhen Greetwin Technology Co.,Limited

10 Watt GSM 850Mhz Mobile Signal Repeater using for Airport, Tunnel ,Village

Shenzhen Greetwin Technology Co.,Limited
Active Member

Contact Us

[China] country

Contact name:Albert

Inquir Now

Shenzhen Greetwin Technology Co.,Limited

10 Watt GSM 850Mhz Mobile Signal Repeater using for Airport, Tunnel ,Village

Country/Region china
City & Province shenzhen guangdong
Categories Other Security & Protection Products
InquireNow

Product Details

10 Watt GSM 850Mhz Mobile Signal Repeater using for Airport, Tunnel ,Village

 


The 10W Mobile Signal Repeater is the kind of repeater used most frequently. It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Base Transceiver Station) and mobiles in Dual wireless network.
The 40dBm Mobile Signal Repeater is working as a relay between the BTS and mobiles. It picks up the signal from the BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna (or the Indoor Signal Distribution System) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.

Features:
* Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corroding;
* Highly selective channel selector can process multiple channels simultaneously;
* No interference to BTS by adopting linear amplifier with high gain and low noise;
* Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink;
* (Optional)USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise repeater's working status and download operational parameters to the repeater.

The RF Repeater is mainly applicable to such case:
*The repeater can find an installation place which can receive pure BTS signal at strong enough level and can meet the requirement of isolation to avoid self-oscillation;
*And the distance between the BTS and the area to be covered is 2km around.

In comparison with FSR (frequency shift repeater) and FOR (fiber optic repeater), the RF Repeater has the following benefits and disadvantages:
Pro:
Easy to build the installation site;
Lower cost of equipment and site-building.

Con:
*Inappropriate installation may cause self-oscillation;
*The Coverage Antenna shall face against the Donor Antenna, which limits the coverage angle;
* High signal noise may be introduced since the Donor Antenna picks up signal from the air;
*The repeater shall be installed within the coverage of BTS.

Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc
Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways

 

Model:
33dBm, GW-33C
37dBm, GW-37C
40dBm, GW-40C
43dBm, GW-43C
 

Specifications:

 

 GSM 850
Working Frequency (customizable)Uplink (MHz)824- 849MHz
Downlink (MHz)869- 894MHz
Working Bandwidth25 MHz
Max. Input Level (Non-Destructive)-10dBm
Max. Output Power (customizable)40dBm
Max. Gain≥ 95dB
Gain Adjustment Range1~31 dB @ step of 1dB
Voltage Standing Wave Ratio (VSWR)< 1.5
Spurious EmissionWithin working band≤ -15dBm/30kHz
Out of working band
(Δf > 2.5MHz)
9kHz~1GHz: ≤ -36dBm/30kHz
1GHz~12.75GHz: ≤ -30dBm/30kHz
Noise Figure≤ 5dB
In-Band Ripple≤ 3dB
Third-Order Intermodulation≤ -45dBc/30kHz (measured under rated output power)
System Delay≤ 5.0μSec
I/O Impedance50Ω
RF ConnectorN-Type (Female) / changeable / bottom of casing
Temperature RangeOperation: -25°C ~ +55°C / Storage: -30°C ~ +60°C
Relative Humidity Range≤ 95% (non condensing)
Power Supply (customizable)AC 220V, 50/60Hz / AC 110V, 50/60Hz
Power Consumption≤ 200W
Backup Power Supply (optional)4 hours
Casing LevelIP65
Dimensions550mm X 440mm X 235mm
Weight40kg
NMS Monitoring Function (optional)Real-time alarm for door status, temperature, power supply, LNA, VSWR, self-oscillation, etc. Remote control such as turn on/off, increasing/decreasing output power, etc. Real-time status for output/input power, UL/DL gain, all status of repeater etc.

 

Support these Frequencies:

 

Frequency RangeUplinkDownlink
CDMA 450452.5 - 457.5MHz462.5 - 467.5MHz
LTE700 A/B699- 716MHz729- 746MHz
LTE700 C777- 787MHz746- 756MHz
LTE700 D788- 798MHz758- 768MHz
LTE 800832- 862MHz791- 821MHz
iDEN806- 824MHz851- 869MHz
CDMA 800/GSM 850824- 849MHz869- 894MHz
GSM 900890- 915MHz935- 960MHz
EGSM880 - 915MHz925 - 960MHz
AWS17001710- 1755MHz2110- 2155MHz
DCS 18001710- 1785MHz1805- 1880MHz
PCS 19001850- 1910MHz1930- 1990MHz
WCDMA/3G 21001920- 1980MHz2110- 2170MHz
LTE 26002500- 2570MHz2620- 2690MHz

 

 

Application Diagram:

 

Indoor Coverage:

Outdoor Coverage:

 

Hot Products

DCS 3G LTE Tri Band Mobile Signal Repeater Uninterrupted for 20dBm Advantages: Digital Display Panel...
Wireless 8 Band Selective Repeater RF Cell Signal Amplifier Large Area Outdoor Repeater is an ...
43dBm 3G Outdoor Mobile Signal Repeater ICS Repeater for Railway Features: · Aluminum-alloy casing ...
ICS Marine Wifi Repeater / Cellular Amplifier Repeater Interference Cancellation System The ICS ...
10 Watt GSM 850Mhz Mobile Signal Repeater using for Airport, Tunnel ,Village The 10W Mobile Signal ...
Tri Band 4G Signal Repeater 20dBm LTE 800MHz GSM 900MHz LTE 1800MHz When Alarm LED is red , There ...