|
Trade Verify
Address: Add.: NO. 101, TIANYUAN AVENUE, DONGXIHU DISTRICT, WUHAN CITY, HUBEI PROVINCE, CHINA
Contact name:Alice
Hubei HYF Packaging Co., Ltd. |
|
Verified Suppliers
|
|
|
450mm - 1200mm Width PETG Shrink Film For Shrinkable Sleeve
1. Product Details Of PETG Shrink Film
PETG Shrink Film Widely used for a bottle(big diameter difference between bottleneck
and body) film labeling, eg.
Beverage bottles packaging, cleaning and bathing products packaging
and cosmetics packaging
2. Product Specifications Of PETG Shrink Film
1) 20 mic - 80 mic Thickness
2) 450mm - 1200mm Width
3) 2500m - 5000m Length
4) 70% - 78% shrinkage
5) Can provide free samples of 150m - 200m
3. Product Parameter Of PETG Shrink Film
| No | Test Item | UNIT | Standard | Test Result | Decide | |||
| 1 | (Average thickness deviation) | μm | ±3 | 0 | Qualified | |||
| 2 | Tensile Strength | (MD) | MPa | ≥42 | 65.8 | Qualified | ||
| (TD) | MPa | ≥142 | 231 | |||||
| 3 | Elongation | (MD) | % | ≥300 | 591 | Qualified | ||
| (TD) | % | ≥35 | 55 | |||||
| 4 | Elasticity Modulus | (MD) | MPa | ≥1500 | 3269 | Qualified | ||
| (TD) | MPa | ≥3000 | 7370 | |||||
| 5 | Heat Shrinkage | (MD) | % | ≤5.0 | 2.3 | Qualified | ||
| (TD) | % | 70～80 | 78 | |||||
| 6 | Haze | % | ≤7.0 | 2.2 | Qualified | |||
| 7 | C.O.F | (IN/OUT) | dynamic friction coefficient | / | ≤0.50 | 0.47 | Qualified | |
| 8 | Wetting Strength | mN/m | ≥38 | ≥38 | Qualified | |||
| 9 | Density | g/cm3 | 1.32±0.3 | 1.46 | Qualified | |||
4. Advantages Of PETG Shrink Film
- Environmental protection: PETG can be repeated recycling and recovery of the cost is low; even if the trademarks used as energy sources will not produce any toxic gases when be burned, no pollution to the environment. PETGF heat shrink film makes a high gold content on re-use opposed to PVC heat shrink film.
- High contractility: Being used the special production process, PETGF heat shrink gets a relatively high shrinkage factor, its lateral direction shrinkage even up to 78%, and can make the mark achieve body-fitted on the containers in different shapes ( Even if the large difference sizes of a single container ) equably.
- Transparency: With the special chemical structure, PETGF heat shrink film has good transparency and gloss which determines the PETGF heat shrink film is easy colored, able to be produced into a lot of beautiful trademark.
5. Package Of PETG Shrink Film
6. Storage Of PETG Shrink Film
Store our PETG shrink films below 30℃ in its original packaging;
Avoid damages from direct sunlight, high moisture and falling down.
Shelf life: 6 months.
7. FAQ Of PETG Shrink Film
1) Can I have a sample order?
Yes, we welcome sample order to test and check quality.
Mixed samples are acceptable.
2) What is the lead time?
Sample needs about 7 days prepared; mass production time needs
15-25 days normally.
3) Do you have any MOQ limit?
Our MOQ is 1 ton
SeaPort: FOB Shanghai
4) What information should I let you know if I want to get a
quotation?
The external size of your products (Thick x Width x Length x
Shrinkage) and the quantity.
10. Workshop Of PETG Shrink Film
100,000 grade purification dust-free workshop
Constant temperature all the year around
Green pollution-free production environment
