Wuxi Octetally Tech Co., Ltd |
Verified Suppliers
|
|
Industrial Roller Shear Slitting Knife For Efficient Cutting And
Shearing
Products descriptions:
Disc shears can be divided into two forms according to their uses: disc shears for cutting plate edges and disc shears for cutting strip steel. In the former, each disc blade is cantilevered on a separate drive shaft. The number of blades is two pairs. It is used in finishing processing lines of medium and thick plates, cross-cutting units of plate coils and continuous pickling and other operating lines.
The blades of the latter are generally fixed on two common transmission shafts (there are also a small number of disc blades fixed on separate transmission shafts). The number of blades is multiple pairs. They are used for slitting units of plate coils, continuous annealing and Galvanizing and other work lines.
GeneralSize | |||
D95*中55*2 | D105*中32*3 | D105*φ52*5 | D120*φ60*5 |
D160*φ80*5 | D200*φ100*5 | D210*φ100*5 | D220*φ120*5 |
D220*中100*10 | D240*中120*10 | D260*φ140*10 | D280*φ160*10 |
D300*φ180*10 | D320*中200*10 | D330*φ200*10 | D360*φ220*10 |
D380*中240*10 | D400*中260*10 | D440*中280*30 | D500*φ300*40 |
D550*φ380*40 | D650*φ420*50 | D800*φ500*60 | D1200*φ600*70 |
The full name of the disc shear is the disc shear. When shearing,
the disc shear blade makes continuous circular motion equal to the
movement speed of the rolling piece (strip), forming a pair of
endless shears.
Disc shears are usually set on the shear line of plates or strips
and are used to longitudinally cut both sides of the moving plate
or strip so that the edges of the cut strips are neat, precise and
burr-free. The blade angle of disc shears is 90 degrees, and the
material is generally made of 5CrW2Si or 6CrW2Si. After treatment,
the hardness can reach Shore 80---90.