|
[China]
Trade Verify
Address: 25th Floor, Huafu Commercial Center, Wenfeng District, Anyang City,Henan Province
Contact name:Kelly Zhang
Gnee (Tianjin) Multinational Trade Co., Ltd. |
|
Verified Suppliers
|
|
|
P275NL1 Steel Plate P275NL1 Hot Rolled Steel Sheet P275NL1 Hot Rolled Steel Plates
| Thickness : 8mm-150mm Width : 1500mm-4000mm Length : 1000mm-15000mm |
| MOQ: 1 PC Product type : Steel plate Delivery time : Promptly ( Stock) or 10-40 days (Production) Payment Terms: L/C, T/T, etc Stock : Available MTC: Available |
| Delivery condition: Q+T or +N |
P275NL1 steel plates to EN10028-3 used in a downstream plant P275NL1 is a pressure vessel steel designed for low temperature use. This is done through the reduction of phosphorus and sulphur in the steel. N10028 P275NL1 steel plate/sheet, under EN standard.EN10028 P275NL1 steel plate/sheet is for boilers and Pressure Vessels steels,it is a normalized steel plate and sheet which is mainly used for building pressure vessels and boilers and pipes
P275NL1 Chemical Composition Max (%)
| Grade | C | Si | Mn | P | S | Al(min) | N |
| P275NL1 | 0.16 | 0.40 | 0.5-1.40 | 0.030 | 0.020 | 0.02 | |
| Cr | Cu | Mo | Nb | Ni | Ti | V | |
| 0.30 | 0.30 | 0.08 | 0.005 | 0.50 | 0.03 | 0.05 |
P275NL1 Mechanical Property
| Grade | Thickness | Yield | Tensilmie | Elongation | Impact Energy(KV J) min | ||
| P275NL1 | mm | Min Mpa | Mpa | Min % | -20° | 0° | +20° |
| ≤ 16 | 275 | 390-510 | 24 | 47 | 55 | 63 | |
| 16> to ≤35 | 275 | 390-510 | 24 | 47 | 55 | 63 | |
| 35> to ≤50 | 265 | 390-510 | 24 | 47 | 55 | 63 | |
| 50> to ≤70 | 255 | 390-510 | 24 | 47 | 55 | 63 | |
| 70> to ≤100 | 235 | 370-490 | 23 | 47 | 55 | 63 | |
| 100> to ≤150 | 235 | 350-470 | 23 | 47 | 55 | 63 | |
It is widely used in petroleum industry, chemical industry, power station, boiler and other industries. It is used to make equipment and components such as reactor, heat exchanger, separator, spherical tank, oil and gas tank, liquefied gas tank, nuclear reactor pressure shell, boiler drum, liquefied petroleum gas bottle, high pressure water pipe of hydropower station, turbine volute and so on.
Gnee can provide professional services, such as the cutting of wear-resistant plates, high-strength plates, extra-thick plates, die steel and other kinds of steel plates, structural parts processing, transportation and distribution of the steel plates, to the factory. We not only effectively help to reduce the amount of processing in the manufacture of large-scale machinery and equipment accessories, gearboxes, rolling mill arches, bearing seats, etc., but also help the customers to save their manpower, material resources and energy from the complicated procedures of steel plate raw material procurement, commissioned processing, and transportation, etc., so that to achieve the goal of zero inventory of raw materials, reduce capital and equipment investment.
