Quick Detail:
- E27 LED PIR Lamp
- Led source, automatically switched to full light mode , The sensor
light is convenient, safe & stability. The enclosure of sensor
light is advanced ABS.
- It’s suitable to use in store lighting, office lighting, home
lighting, hotel lighting, and supermarket lighting.
- Model Number :LDA117005
Description:
- The sensor light with source of LED, the power consumption and the
life are much better than lamps and Energy-saving lamps. When
environment illumination below 5Lx, the sensor light is auto ready
for working, then lighting for moving people, and auto turning off
after delaying time. The sensor light using convenient, safe &
stability, and not be interfered by noise and so on.
- The enclosure of sensor light is advanced ABS.
- Using scope: corridor, toilets, storage room, terrace, porch, foyer
and so on.
Applications:
- This Product is in the category of "Downlights" or "LED Downlights
".
- It can be used in following applications:
Commercial Lighting,
Office Lighting,
Industrial Lighting,
Home Lighting,
Hotel Lighting
Specifications:
MODEL | LDA117005 |
Specifications | Φ155×75mm |
Power Voltage | AC/220v~240v |
Frequency | 50~60Hz |
Type of Light Source | LED, 32LED |
LED Color | White, Warm White, Yellow |
Power Source | ≤3.5w |
Power Life | 75000h |
Sensing Distance | 5m~8m |
Sensing Angle | 360° / ≤140°(Cone Angle) |
Delaying Time | 30s ± 5s |
Working Temperature | -20℃~50℃ |
Installation | E27 Lamp |
Competitive Advantage:
- The LED downlights is applied with new led power, it’s a new
product, the advantage compares to traditional downlights is as
below :
-
- 1- ENERGY SAVING , same lumens power
only 1/4 compares to traditional power;
- 2- LOW CARBON, exclude mercury, it’s
pollution-free for the environment.
- 3- LONG LIFETIME, 75000hours, around
5 times than the traditional light.
- 4- ECONOMIC: energy saving to get
lower electricity, cost return back within 2years.
- 5- DEEP REFLECTOR DESIGN, anti-glare
diffuser, make the light very soft and not sizzling. It’s perfect
to use in the store lighting.
- 6- WIDE BEAM ANGLE DESIGN, make the
light very soft and beam angle is big enough to replace the main
lighting, replace the traditional downlight well.
- 7- QUICK CONNECT, between the fitting and the driver have a quick
female/male connector, will save much labor cost.