Home Companies xiamen shengstone industry&trade co.,LTD

Laboratory Epoxy Resin Day Platform Cpuntertop,All Steel Structure Epoxy Resin Worktop Furniture

Active Member

Contact Us

[China]

Address: 1001,Logistics center no 1 hai tian rode,xiamen china

Contact name:

xiamen shengstone industry&trade co.,LTD

Laboratory Epoxy Resin Day Platform Cpuntertop,All Steel Structure Epoxy Resin Worktop Furniture

Country/Region china
City & Province xiamen fujian
Categories Other Special Transportation

Product Details

PROPERTIES OF EPOXY RESIN WORKTOP
 

1.Resistance to high temperature
And laboratory common high temperature 600 degrees, not foaming, not broken, especially suitable for a long time to place the combustion furnace ventilation cabinet.
 

2.24 hours super corrosion resistance

Inert materials have strong resistance to most corrosive chemicals.

3.Absolute moisture

The epoxy resin worktop with low water absorbition, does not absorb moisture in the air, the installation will not warp deformation, especially suitable for the operation of splash zone.

4.Pollution resistance

Surface is smooth, no stoma, not to hide the dirt, effectively restrain bacterial growth, such as the SARS virus, etc.,especially suitable for the medicine and biological laboratories.


5.Safe and reliable

Do not contain asbestos ingredient, nonflammable, non-conductive, do not produce poisonous gas when heated, will not violate the safety and health of operator.

6.Durable

One core, not to take off layer, not inflation, not cracked,surface scratches can be repaired after renovation

 

7.High performance to price ratio

Unique 19mm thickness, the market is the highest price of the laboratory table system.
 
8.Beautiful appearance

Smooth surface (MATT finish) , light reflection, easy to clean, easy maintenance.

 
9.Uniform color

Ensure the color of different batches of products is permanent, can be used for multi color selection.


PHYSICAL PROPERTY
 
Physical propertyTest standardImperial unitsInternational unit
Compressive strengthASTMD69538.355psi264MPa
Bending strengthASTMD79013.210psi90.9MPa
Tensile strengthASTMD63811.100psi76MPa
DensityASTMD792143.64lbs/ft32.30g.cm3
M hardnessASTMD78593.793.7
Hot deformation temperatureASTMD648457°F230℃
Coefficient of thermal expansionASTMD6961.2*10-5in/°F2.65*10-5mm/℃
Fire resistanceASTMD635Non combustibleNon combustible
Water absorptionASTMD5700.05%0.05%



CHEMICAL PROPERTY
 
1.Testing method

After 24 hour exposure,exposed areas are washed with water,then a detergent solution,finally with naphtha,then rinsed with distillde water and dried with a cloth.Change in surface finish and function shall be described by the following(1-5) ratings:

1) No Effect: No detectable change in the material surface.

2) Excellent: Slight detectable change in color or gloss,but no change to the function or life of the work surface material.

3) Good: Clearly discernible change in color or gloss,but no significant impairment of surface life or function.

4) Fair: Objectionable change in appearance due to surface discoloration or etch,possiby resulting in deterioration of function over an extended period.

5) Failure: Pitting, cratering or erosion of work surface material,obvious and significant deterioration.


2.Minimum acceptable results

Minimum acceptable test results shall be equal to or better than the following reagent rating:
CHEMICALSMINIMUM
ACCEPTABLE
RESULTS
Inorganic Acids-Corrosive 
Chromic Acid 40%4
Hydrochloric Acid 10%1
Hydrochloric Acid 37%1
Nitric Acid 40%1
Nitric Acid 70%1
Sulfuric Acid 60%1
Sulfuric Acid 96%5
Organic Acids-Corrosive 
Acetic Acid 5%1
Acetic Acid,Glacial1
Citric Acid 1%1
Oleic Acid1
Phenol Solution 5%1
Alkaline Solutions-Corrosive 
Ammonium Hydroxide 10%1
Sodium Carbonate Sol 20%1
Sodium Hydroxide 60%1
Sodium Hypochlorite Sol 4%1
Potassium Hydroxide 15%1
Organic Solvents 
Acetone2
Benzen2
Carbon Tetrachloride2
Dimethyl Ether1
Dimethyl Formamide1
Ethyl Acetate1
Ethyl Alcohol 95%1
Ethylene Dichloride1
Heptane1
Isooctane1
Kerosene1
Methyl Alcohol1
Toluene1
Organic Compounds 
Aniline1
Mineral Oil1
Oilve Oil1
Soap Solution 1%1
Transformer Oil1
Turpentine1
 
 
enterprise research office lab furniture bench worktop
 
lab bench worktop
 
colleges and universities lab furniture islan worktop1
 
 
lab worktop
 

TEL: +86-592-6018375,6018371

 

FAX: +86-592-5622135

 

WHATSAPP: +86-139-0693-3518

 

EMAIL: sales@shengstone.com

 

http://www.shengstone.com

 

Hot Products

PROPERTIES OF EPOXY RESIN WORKTOP 1.Resistance to high temperature And laboratory common high ...
Size: 600*600 mm 600*800 mm 600*1200 mm 600*1500 mm Thickness:20/25 mm Color: Dark grey Edge...
Size: 600*600 mm 600*800 mm 600*1200 mm 600*1500 mm Thickness:20/25 mm Color: Dark grey Edge...
Size: 600*600 mm 600*800 mm 600*1200 mm 600*1500 mm Thickness:20/25 mm Color: Dark grey Edge...
Classic Fume Hood Bases Classic epoxy resin fume hood bases provide a durable chemical resistant ...
BOARD SIZE: 1220mm*2440mm 1220mm*3050mm 1220mm*3660mm 1525mm*3050mm 1525mm*3660mm 1830mm*1830mm ...