BOTOU SHIBO MACHINERY MANUFACTURING CO.,LTD |
|
1.Hydraulic full-automatic C purlin metal roll forming machine presention
The Fully Automatic Adjustable C 80-300 purlin forming machines automatic c z purlin roll forming equipment adopt cast iron structure. The driving way is chain driving. The size will be adjusted by the spacers between the rollers. The cutting is after forming, so the cutting position will be very smooth. There are two punching holes at the two sides of the cutting position. The products are widely used in super market shelf.
2.Product parameters
1) Thickness of raw material:1.5mm-3.2mm, G300-345Mpa HR/CR/GI
2) Profile drawing of products (as per your requirement)
3) Forming Machine Structure: machine body formed by welding with high quality box iron
4) Shaft material:S45C quenched and tempered after finishing treatment
5) Main Shaft diameter:φ80mm
6) Rollers: GCr15 with heat treatment and hard chrome-plated HRC58-62
7) Number of forming stations: 12stations
8) Main motor power: 15kw
9) Cutting: hydraulic shearing after forming
10) Electronic controlling system: full-frequency PLC controlling system
11) Different production requirement will be operated from touch screen
12) Capacity: 5 tons
13)Tighten type: by hand. The four-bar center is stretched out.
14) Braking: The main shaft is tight.
No. | Part name | Unit | Qty |
1 | Manual decoiler | Set | 1 |
2 | Entry Beach | Set | 1 |
3 | Main machine for Roll Forming | Set | 1 |
4 | Cutting system | Set | 1 |
5 | Punching | Set | 1 |
6 | Output table | Set | 1 |
7 | Control System(PLC) | Set | 1 |
8 | Hydraulic station | Set | 1 |