Hydraulic cutting Steel Profile Metal C and Z Purlins Roll forming
Machine with adjustable models
1. Usage and introduction of this production line
The C and Z purlin roll forming machine line adopt cast iron
structure. The driving way is chain driving. The size will be
adjusted by the spacers between the rollers. The cutting is after
forming, so the cutting position will be very smooth. There are two
punching holes at the two sides of the cutting position. The
products are widely used in super market shelf.
2. Components of the whole C and Z purlin forming machine line
|3||Main Machine for roll forming||set||1|
3. The main parameters of Purlin forming machine line
1) Thickness of raw material:1.5mm-3.2mm, G300-345Mpa HR/CR/GI
2) Profile drawing of products (as per your requirement)
3) Forming Machine Structure: machine body formed by welding with
high quality box iron
4) Shaft material:S45C quenched and tempered after finishing
5) Main Shaft diameter:φ80mm
6) Rollers: GCr15 with heat treatment and hard chrome-plated
7) Number of forming stations: 12stations
8) Main motor power: 15kw
9) Cutting: hydraulic shearing after forming
10) Electronic controlling system: full-frequency PLC controlling
11) Different production requirement will be operated from touch
4. Extra service if you place orders from us
1). Guarantee : 12 months guarantee for the machine. If some parts
we will supply them for free.
2).Engineers can offer overseas service if you arrange the round
trip ticket and accommodation.
3).The spare parts ,such as limit switch ,solenoid ,fuse ,,push
for free .
5. The normal sizes our machine can produce.
6. Galvanized Steel Profile C Z Purlin Roll Forming Machine
With CE Certification details