Active Member
|
[China]
Address: No. 1, Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu Province, China
Contact name:Emma Teng
Jiangyin Dingbo Technology Co., Ltd |
|
|
Standard Size Highway Roadside W Beam Guardrail Roll Forming Machine
W beam highway guardrail roll forming machine is especially used for producing the guardrails of road. The whole line adopts PLC controlling system and AV inverter speed adjustment, it can run full automatically. It`s the essential equipment in the steel structure industry and road transportation industry.
| 1 | Rolling Material:T:3-4mm,Q235AGalvanized Coil |
| 2 | Rolling Speed:10-15M/min |
| 3 | Under Frame:500H-beam |
| 4 | Sidewall Thickness:25mm |
| 5 | Roller Station:19Groups |
| 6 | Roller Materail: GCr15Bearing Steel Treatment HRC58-62 |
| 7 | Shaft Materail: High grade 45# forging steel with cylindrical grinding |
| 8 |
Shaft Diameter: ⊄ 95mm |
| 9 | Main Motor Power: 37kW |
| 10 | Tranmission Method:Universal joint transmission gear box |
| 11 | Leveling Motor Power: 5.5kW |
| 12 | Hydraulic Motor Power: 15kW,Pressure:20Mpa |
| 13 | Punching&Cutting Method: adopt hydraulic driving,flat sheet pre-punch, post to cut after roll forming. |
| 14 | Punching&Cutting Mold:Cr12quenching treatment,HRC58-60 |
| 15 | Electrical:whole set adopts industrial computer PLC frequency changing controlled for length to cut tolerance≤1.5mm |
| 16 | Whole unit size(mm):9800x1600x1500 |
Profile as flowing:
Working Flow:
Charing—Feeding inlet(put the strip into the first entrance roller correctly)--Strip flattening—panel punching—forming rollers—Hydraulic cutting(roller forming by main machine)--out table(Finished products out of the machine by breakst)
Machine Photo:
