Active Member
|
[China]
Address: No. 1, Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu Province, China
Contact name:Emma Teng
Jiangyin Dingbo Technology Co., Ltd |
|
| Technical parameters of PR-600-305 | |
| Size | 8900mmX2200mmX2300mm |
| Total Weight | About 10Ton |
| Cutting Material | 12CrMoV, Heat treatment |
| Cutting type | Mechanical Cutting Device |
| Forming type | Roll-formed and length-set cutting |
| Main Motor Power | 5.5KW |
| Bending Power | 3.0KW+1.5KW |
| Cutting Power | 4.0KW |
| Seaming Power | 1.1KW+1.1KW |
| Material of rollers | 45# steel, quenched HRC 55~65 |
| Feeding width | 600mm |
| Finished width | 305mm |
| Operating factor of the panel | 50.8% |
| Thickness of the Panel | 0.6-1.5mm |
| Applicable Span | 4~28m |
| Name | Amount | Usage |
| Manual Un-coiler | 1 | Roll the sheets;Sheet roll supporter |
| Sewing machine | 2 | Assembling the sheets |
| Cradle | 16 | Plate supporter |
| Leg of cradle | 15 | Supporter Cradle |
| Small leg of cradle | 38 | Adjust the leg of cradle |
| Fastening screw for leg | 46 | Fastening the legs |
| Side cradle | 8 | Plate supporter |
| Suspender | 3 | Lifting |
| Pin of suspender | 2 | Connect the suspender |
| Hanger | 4 | Lifting |
| Clamp | 4 | Bait sheets |
| Bearing(208#) | 4 | To drive the rollers |
| Driving chains | 3(run) | To roll the gears |
| Chain links | 3 | To link the chain |
| Half section | 3 | To link the chain |
| Super pliers | 1 | Bait sheets |
| Metal scissors | 1 | For cutting |
| Wrench | 1 | For set screw |
| Crank handle | 1 | Adjust height of landing leg |
| Travel switch | 1(suit) | Measure length of sheet automatically |
| VCD | 1 | Showing how to operate the machine Showing how to do the project |
Machine Picture:
