Home Companies JIANGSU LIANZHONG METAL PRODUCTS (GROUP) CO., LTD

DIN 1.4401 Non Magnetic ASTM 316 316L Stainless Steel Coil 12 - 20GA Thic 2B Finish

Contact Us

[China]

Trade Verify

Address: Guang Yi Columbus B Tower, Wuxi, Jiangsu, China

Contact name:Vera

JIANGSU LIANZHONG METAL PRODUCTS (GROUP) CO., LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

DIN 1.4401 Non Magnetic ASTM 316 316L Stainless Steel Coil 12 - 20GA Thic 2B Finish

Country/Region	china
City & Province	wuxi jiangsu
Categories	Aluminum

Product Details

DIN 1.4401 Non Magnetic ASTM 316 316L Stainless Steel Coil 12 - 20GA Thic 2B Finish

316L has a wide range of applications in the chemical industry because of its excellent corrosion resistance. 316L is also a derivative steel grade belonging to 18-8 type austenitic stainless steel with 2 to 3% Mo added. On the basis of 316L, many steel grades are also derived, such as 316Ti derived from adding a small amount of Ti, 316N derived from adding a small amount of N, and 317L derived from increasing Ni and Mo content.
Most of the existing 316L in the market is produced according to the American Standard. Due to cost considerations, steel mills generally lean the Ni content of their products to the lower limit as much as possible. The American Standard specifies that the Ni content of 316L is 10-14%, while the Japanese Standard specifies that the Ni content of 316L is 12-15%. According to the minimum standard, there is a 2% difference in Ni content between the American Standard and the Japanese Standard, which is reflected in the price, so customers still need to see when purchasing 316L products, whether the product is referenced to ASTM or JIS standards.

316 Stainless Steel Coil Specification	ASTM A240 / ASME SA240
316 Stainless Steel Coil Manufacturing Process	Hot Rolled (HR) / Cold Rolled (CR)
316 Stainless Steel Coil Grades	202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc. UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904 EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539
316 Stainless Steel Coil Thickness	0.6 MM TO 80 MM THICKNESS
316 Stainless Steel Coil Width	1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement
316 Stainless Steel Coil Length	2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement
316 Stainless Steel Coil Surface Finish	2B, 2D, BA, MATT, MATT PVC, No.4, No.5, SB, HR, No.8, Mirror, Hairline, Brush, Textured, Oil base wet Polished, Both sides Polished available.
316 Stainless Steel Coil Coating	PVC coating Normal / Laser, Film: 100 micrometer, Color: black/white.
316 Stainless Steel Coil Other Testing	NACE MR0175, Ultrasoung TEST, IGC TEST, Intergranular Corrrosion Test as per ASTM A262 Practice E, Charpy Impact Test, Macro, Grain Size, Hardness, etc.
316 Stainless Steel Coil Value Added Services	Gas Cutting / CNC Plasma Cutting / Profiling / Rolling / Bending / Coil Metal Fabrication / Drill / Punch / Machining / Sand Blasting / Shot Blasting / Heat Treatment
316 Stainless Steel Coil Packaging	Loose / Carrate / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps
316 Stainless Steel Coil Shipment & Transportation	By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
316 Stainless Steel Coil Material Test Certificate	Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

Stainless Steel Chemical Composition Chart, Percentage (%)
Stainless Steel	C, ≤	Mn, ≤	P, ≤	S, ≤	Si, ≤	Cr	Ni	Mo	N, ≤	Other Elements, ≤
304	0.08	2.00	0.045	0.03	1.00	18.0-20.0	8.0-11.0	–	–	–
304L	0.03	2.00	0.045	0.03	1.00	18.0-20.0	8.0-12.0	–	–	–
316	0.08	2.00	0.045	0.030	1.00	16.0-18.0	10.0-14.0	2.00-3.00	–	–
316L	0.03	2.00	0.045	0.030	1.00	16.0-18.0	10.0-14.0	2.00-3.00	–	–
321	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	0.10	≥ Ti 5×(C+N), ≤ 0.70
201	0.15	5.50-7.50	0.06	0.03	1.00	16.0-18.0	3.5-5.5	–	0.25	–
202	0.15	7.50-10.00	0.06	0.03	1.00	17.0-19.0	4.0-6.0	–	0.25	–
205	0.12-0.25	14.0-15.5	0.06	0.03	1.00	16.5-18.0	1.0-1.7	–	0.32-0.40	–
301	0.15	2.00	0.045	0.03	1.00	16.0-18.0	6.0-8.0	–	0.10	–
301L	0.03	2.00	0.045	0.03	1.00	16.0-18.0	6.0-8.0	–	0.20	–
301LN	0.03	2.00	0.045	0.03	1.00	16.0-18.0	6.0-8.0	–	0.07-0.20	–
302	0.15	2.00	0.045	0.03	0.75	17.0-19.0	8.0-10.0	–	0.10	–
302B	0.15	2.00	0.045	0.03	2.00-3.00	17.0-19.0	8.0-10.0	–	0.10	–
303	0.15	2.00	0.2	≥0.15	1.00	17.0-19.0	8.0-10.0	–	–	–
303Se	0.15	2.00	0.2	0.06	1.00	17.0-19.0	8.0-10.0	–	–	Se 0.15
304H	0.04-0.10	2.00	0.045	0.03	0.75	18.0-20.0	8.0-10.5	–	–	–
304N	0.08	2.00	0.045	0.03	1.00	18.0-20.0	8.0-11.0	–	0.10-0.16	–
304LN	0.03	2.00	0.045	0.03	1.00	18.0-20.0	8.0-11.0	–	0.10-0.16	–
305	0.12	2.00	0.045	0.03	1.00	17.0-19.0	11.0-13.0	–	–	–
308	0.08	2.00	0.045	0.03	1.00	19.0-21.0	10.0-12.0	–	–	–
309	0.2	2.00	0.045	0.03	1.00	22.0-24.0	12.0-15.0	–	–	–
309S	0.08	2.00	0.045	0.03	1.00	22.0-24.0	12.0-15.0	–	–	–
309H	0.04-0.10	2.00	0.045	0.03	0.75	22.0-24.0	12.0-15.0	–	–	–
309Cb	0.08	2.00	0.045	0.03	1.00	22.0-24.0	12.0-16.0	–	–	≥ Cb 10 x C, ≤1.10
309HCb	0.04-0.10	2.00	0.045	0.03	0.75	22.0-24.0	12.0-16.0	–	–	≥ Cb 10 x C, ≤1.10
310	0.25	2.00	0.045	0.03	1.5	24.0-26.0	19.0-22.0	–	–	–
310S	0.08	2.00	0.045	0.03	1.5	24.0-26.0	19.0-22.0	–	–	–
310H	0.04-0.10	2.00	0.045	0.03	0.75	24.0-26.0	19.0-22.0	–	–	–
310Cb	0.08	2.00	0.045	0.03	1.5	24.0-26.0	19.0-22.0	–	–	≥ Cb 10 x C, ≤ 1.10
310 MoLN	0.02	2.00	0.03	0.01	0.5	24.0-26.0	20.5-23.5	1.60-2.60	0.09-0.15	–
314	0.25	2.00	0.045	0.03	1.50-3.00	23.0-26.0	19.0-22.0	–	–	–
316H	0.04-0.10	2.00	0.045	0.03	0.75	16.0-18.0	10.0-14.0	2.00-3.00	–	–
316Ti	0.08	2.00	0.045	0.03	1.00	16.0-18.0	10.0-14.0	2.00-3.00	0.1	≥ Ti 5 × (C + N), ≤0.70
316Cb	0.08	2.00	0.045	0.03	1.00	16.0-18.0	10.0-14.0	2.00-3.00	0.1	≥ Cb 10 × C, ≤ 1.10
316N	0.08	2.00	0.045	0.03	1.00	16.0-18.0	10.0-14.0	2.00-3.00	0.10-0.16	–
316LN	0.03	2.00	0.045	0.03	1.00	16.0-18.0	10.0-13.0	2.00-3.00	0.10-0.16	–
317	0.08	2.00	0.045	0.03	1.00	18.0-20.0	11.0-15.0	3.0-4.0	0.1	–
317L	0.03	2.00	0.045	0.03	0.75	18.0-20.0	11.0-15.0	3.0-4.0	0.1	–
317LM	0.03	2.00	0.045	0.03	0.75	18.0-20.0	13.5-17.5	4.0-5.0	0.2	–
317LMN	0.03	2.00	0.045	0.03	0.75	17.0-20.0	13.5-17.5	4.0-5.0	0.10-0.20	–
317LN	0.03	2.00	0.045	0.03	0.75	18.0-20.0	11.0-15.0	3.0-4.0	0.10-0.22	–
321	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	0.1	≥ Ti 5 × (C + N), ≤ 0.70
321H	0.04-0.10	2.00	0.045	0.03	0.75	17.0-19.0	9.0-12.0	–	–	≥ Ti 4 × (C + N), ≤ 0.70
334	0.08	1.00	0.03	0.015	1.00	18.0-20.0	19.0-21.0	–	–	Al 0.15-0.60, Ti 0.15-0.60
347	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	–	≥ Cb 10 × C, ≤ 1.00
347H	0.04-0.10	2.00	0.045	0.03	0.75	17.0-19.0	9.0-13.0	–	–	≥ Cb 8 × C, ≤ 1.00
347LN	0.005-0.020	2.00	0.045	0.03	1.00	17.0-19.0	9.0-13.0	–	0.06-0.10	Cb 0.20-0.50, 15 × C ≥
348	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	–	Cb 10×C-1.10, Ta 0.10, Co 0.20
348H	0.04-0.10	2.00	0.045	0.03	0.75	17.0-19.0	9.0-13.0	–	–	(Cb + Ta) 8×C ≥ , 1.00 ≤, Ta 0.10, Co 0.20
2205	0.03	2.00	0.03	0.02	1.00	22.0-23.0	4.5-6.5	3.0-3.5	0.14-0.20	–
2304	0.03	2.5	0.04	0.03	1.00	21.5-24.5	3.0-5.5	0.05-0.60	0.05-0.60	–
255	0.04	1.5	0.04	0.03	1.00	24.0-27.0	4.5-6.5	2.9-3.9	0.10-0.25	Cu 1.50-2.50
2507	0.03	1.2	0.035	0.02	0.8	24.0-26.0	6.0-8.0	3.0-5.0	0.24-0.32	Cu ≤0.50
329	0.08	1.00	0.04	0.03	0.75	23.0-28.0	2.0-5.00	1.00-2.00	–	–
403	0.15	1.00	0.04	0.03	0.5	11.5-13.0	–	–	–	–
405	0.08	1.00	0.04	0.03	1.00	11.5-14.5	≤0.5	–	–	Al 0.10-0.30
410	0.08-0.15	1.00	0.04	0.03	1.00	11.5-13.5	–	–	–	–
410S	0.08	1.00	0.04	0.03	1.00	11.5-13.5	≤0.6	–	–	–
414	0.15	1.00	0.04	0.03	1.00	11.5-13.5	1.25-2.50	–	–	–
416	0.15	1.25	0.06	≥0.15	1.00	12.0-14.0	–	–	–	–
416Se	0.15	1.25	0.06	≥0.06	1.00	12.0-14.0	–	–	–	Se 0.15
420	0.15, ≥	1.00	0.04	0.03	1.00	12.0-14.0	–	–	–	–
420F	0.30-0.40	1.25	0.06	≥0.15	1.00	12.0-14.0	≤0.5	–	–	Cu 0.60
420FSe	0.20-0.40	1.25	0.06	0.15	1.00	12.0-14.0	≤0.5	–	–	Se 0.15; Cu 0.60
422	0.20-0.25	0.50-1.00	0.025	0.025	0.5	11.0-12.5	0.50-1.00	0.90-1.25	–	V (0.20-0.30), W (0.90-1.25)
429	0.12	1.00	0.04	0.03	1.00	14.0-16.0	–	–	–	–
430	0.12	1.00	0.04	0.03	1.00	16.0-18.0	–	–	–	–
430F	0.12	1.25	0.06	≥0.15	1.00	16.0-18.0	–	–	–	–
430FSe	0.12	1.25	0.06	0.06	1.00	16.0-18.0	–	–	–	Se 0.15
439	0.03	1.00	0.04	0.03	1.00	17.0-19.0	≤0.5	–	0.03	≥ Ti [0.20+4(C+N)], ≤ 1.10; Al 0.15
431	0.2	1.00	0.04	0.03	1.00	15.0-17.0	1.25-2.50	–	–	–
434	0.12	1.00	0.04	0.03	1.00	16.0-18.0	–	0.75-1.25	–
436	0.12	1.00	0.04	0.03	1.00	16.0-18.0	–	0.75-1.25	–	≥ Cb 5×C, ≤ 0.80
440A	0.60-0.75	1.00	0.04	0.03	1.00	16.0-18.0	–	≤0.75	–	–
440B	0.75-0.95	1.00	0.04	0.03	1.00	16.0-18.0	–	≤0.75	–	–
440C	0.95-1.20	1.00	0.04	0.03	1.00	16.0-18.0	–	≤0.75	–	–
440F	0.95-1.20	1.25	0.06	0.15	1.00	16.0-18.0	≤0.5	–	–	Cu ≤0.60
440FSe	0.95-1.20	1.25	0.06	0.06	1.00	16.0-18.0	≤0.5	–	–	Se ≤0.15; Cu ≤0.60
442	0.2	1.00	0.04	0.04	1.00	18.0-23.0	≤0.6	–	–
444	0.025	1.00	0.04	0.03	1.00	17.5-19.5	≤1.00	1.75-2.50	0.035	Ti+Cb 0.20+4 × (C+N)-0.80
446	0.2	1.5	0.04	0.03	1.00	23.0-27.0	≤0.75	–	0.25	–
800	0.1	1.5	0.045	0.015	1.00	19.0-23.0	30.0-35.0	–	–	Cu 0.75; ≥ FeH 39.5; Al 0.15-0.60
800H	0.05-0.10	1.5	0.045	0.015	1.00	19.0-23.0	30.0-35.0	–	–	Cu 0.75; ≥ FeH 39.5; Al 0.15-0.60
904L	0.02	2.00	0.045	0.035	1.00	19.0-23.0	23.0-28.0	4.00-5.00	0.1	Cu 1.00-2.00
Alloy 20	0.07	2.00	0.045	0.035	1.00	19.0-21.0	32.0-38.0	2.00-3.00	–	Cu 3.0-4.0; ≥ Nb 8 × C; ≤1.00
XM-1	0.08	5.0-6.5	0.04	0.18-0.35	1.00	16.00-18.0	5.0-6.5	–	–	Cu 1.75-2.25
XM-2	0.15	2.00	0.05	0.11-0.16	1.00	17.0-19.0	8.0-10.0	0.40-0.60	–	Al 0.60-1.00
XM-5	0.15	2.5-4.5	0.2	≥0.25	1.00	17.0-19.0	7.0-10.0	–	–	–
XM-6	0.15	1.50-2.50	0.06	≥0.15	1.00	12.0-14.0	–	–	–	–
XM-10	0.08	8.0-10.0	0.045	0.03	1.00	19.0-21.5	5.5-7.5	–	0.15-0.40	–
XM-11	0.04	8.0-10.0	0.045	0.03	1.00	19.0-21.5	5.5-7.5	–	0.15-0.40	–
XM-15	0.08	2.00	0.03	0.03	1.50-2.50	17.0-19.0	17.5-18.5	–	–	–
XM-17	0.08	7.50-9.00	0.045	0.03	0.75	17.5-22.0	5.0-7.0	2.00-3.00	0.25-0.50	–
XM-18	0.03	7.50-9.00	0.045	0.03	0.75	17.5-22.0	5.0-7.0	2.00-3.00	0.25-0.50	–
XM-19	0.06	4.0-6.0	0.045	0.03	1.00	20.5-23.5	11.5-13.5	1.50-3.00	0.20-0.40	Cb 0.10-0.30, V 0.10-0.30
XM-21	0.08	2.00	0.045	0.03	0.75	18.0-20.0	8.0-10.5	–	0.16-0.30	–
XM-27	0.01	0.4	0.02	0.02	0.4	25.0-27.5	≤0.5	0.75-1.50	0.015	Cu 0.20; Cb 0.05-0.20; (Ni + Cu) 0.50
XM-33	0.06	0.75	0.04	0.02	0.75	25.0-27.0	≤0.5	0.75-1.50	0.04	Cu 0.20; Ti 0.20-1.00; ≥ Ti 7(C+N)
XM-34	0.08	2.5	0.04	≥0.15	1.00	17.5-19.5	–	1.50-2.50	–	–
PH 13-8Mo	0.05	0.2	0.01	0.008	0.1	12.25-13.25	7.5-8.5	–	–	–
15-5 PH	0.07	1	0.04	0.03	1	14.0-15.5	3.5-5.5	–	–	2.5-4.5 Cu; 0.15-0.45 Nb
17-4 PH	0.07	1	0.04	0.03	1	15.5-17.5	3.0-5.0	–	–	3.0-5.0 Cu; 0.15-0.45 Nb
17-7 PH	0.09	1	0.04	0.04	1	16.0-18.0	6.5-7.75	–	–	0.75-1.5 Al

Packing and transportation:

About Us:

We provide customers with different specifications and materials for stainless with 10 years' experience.Special Purpose with high quality, fast delivery, competitive price and excellent exprience of after-sale service.We have keep highly appreciated cooperation with purchasers from many countries .If you are interested in our products, please feel free to contact me any time! Welcome to hear from your inquiry!

Certificates:

CUSTOMER:

FEEDBACK:

FAQ:

Q: Are you trading company or manufacturer ?
A: We are manufacturer.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment<=1000USD, 50% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.or negotiable.

Hot Products

DIN 1.4441 UNS S31673 Stainless Steel Tube For Surgical Implants Pipe Ni 14%

Contact Us

JIANGSU LIANZHONG METAL PRODUCTS (GROUP) CO., LTD

DIN 1.4401 Non Magnetic ASTM 316 316L Stainless Steel Coil 12 - 20GA Thic 2B Finish

Product Details

DIN 1.4401 Non Magnetic ASTM 316 316L Stainless Steel Coil 12 - 20GA Thic 2B Finish

Hot Products

DIN 1.4441 UNS S31673 Stainless Steel Tube For Surgical Implants Pipe Ni 14%

ASTM 316Ti UNS S31615 High Temperature Resistance Stainless Steel Pipe OD 0.5 Inches

Pure Polish 304 316L Stainless Steel Hexagonal Pipe H2 - H90mm For Container Racks

ASTM 316Ti UNS S31615 Polish Square Stainless Steel Pipe High Temperature Resistance

201 J1 J2 304 Bright Metal Polished Stainless Steel Round Pipe 5mm Ss Rod

ASTM A312 Stainless Steel Pipe Inner Diameter 2-200MM For Industrial