Home Companies Please input your companyname!

W beam galvanized guardrail roll forming machine with punching process

Active Member

Contact Us

[China]

Contact name:

Please input your companyname!

W beam galvanized guardrail roll forming machine with punching process

Country/Region china
Categories Metal Crafts

Product Details

W beam galvanized guardrail roll forming machine with punching process

 

The requirement of factory's condition

  1. Power: 380V±10%, 50Hz±10%
  2. Condition: Temperature: -10°C~50°C, moisture content: 20%-80%(No fog)
  3. Guide grade, electric control box, control table: IP40
  4. Hydraulic system: rated pressure:32Mpa, working pressure:10-12Mpa, flow rate: 90L/Min
  5. The total power : 80kw
  6. Buyer`s prepared: power switch, wire and cable at the work field, string plumbing, the oil for gear case, N46 hydraulic oil.
  7. Working area: Length 30m, Width 7.5m, Height 2

 

Main Parameter of the roll forming machine

 

1. Decoiler: Single-arm manual inner expand type, power require: BWD-B1-71-1.5K The range of inner expand &contract: 480-520mm cycloid motor, loading capacity 6T

 

2. Alignment guiding roller: 4 roller on both side to control the transport of the raw material, to avoid the raw material being left and right ,or up and down, and use the screw to adjust

 

3. 9 rollers levering machine: The diameter of the roller is 117mm,material hardness is 40CrHRC 48-52 degree, the width of supplier table 500mm,the thickness of flat panel 2-4 mm, the power of motor 11kw,the ZQ 350 reducer, set with the diameter 300mm of electromagnetic brake, levering speed:22m/min

 

4. 300T hydraulic press:

Hydraulic motor power:22kw,32Mpa,plunger pump(90L/Min),normal working pressure:10-14Mpa,working table:1200mm*1200mm. We will design the punch as the requirement to ensure the flotsam will flow out the hydraulic machine automatically .the material of the punching head & cutting mould is:Cr12mov

 

5. Punching, guiding, material- transmitted table: Jointing

 

6. High speed feeding machine:

Equipped with 1.5KW cycloid need reducer ,the diameter of roller is115mm, the material hardness is 40CrHRC 48-52 degree

 

7. Photoelectrical measure unit:

The accuracy of measure 4320+/-2mm

 

8. Roller guiding material table: Jointing , passive roller

 

9.12 group cold curve main machine:

GY250S series in the style of door structure ,rolling metal band(material:Q235) thickness(3-4mm) ,the diameter of the axis of roller(80mm), the rolling speed(12-22m/min), approximately 2-3 pc of guard rail panel which length is at 4320mm.The height of the material: 90mm,the material of main roller:Gcr15(HRC55-60). Main transport: 45KW, ZQ650reducer.

 

10. Roll finished product support table:

5m finished product support table, jointing ,passive roller

 

11.Some parameter for the machine:

The total power of the machine (80KW), total weight:42T, dimension of the machine (30mx4.5mx2.5m)

 

 

Machine Show

 


 

Hot Products

Sealed Water Pipes Roll Forming Equipment For Colored Steel Sheet Technical Specifications No. Item ...
High Precision Steel Roll Forming Machine Hydraulic Drive Folder Structure and Features: 1).The ...
PE PVD Coated Steel Coil Wall Panel Roll Forming Machine Durable Specification Baseplate: galvanized...
AC Frequency Conversion Steel Roll Forming Machine Water Down Pipe Forming Machine Main components ...
W beam galvanized guardrail roll forming machine with punching process The requirement of factory's ...
0.3-1.2 mm thickness Galvanized Steel Coil with zinc coating Specifications of galvanized steel coil...