Riselaser Technology Co., Ltd |
Verified Suppliers
|
|
Small jewelry laser welding machine with high laser energy and HD camera
How the machines works?
The laser welding process utilizes an amplified beam of a specific wavelength to create a strong and nearly seamless weld in seconds. It sounds like a complicated process, but it's actually quite simple.
The beam from a laser welding machine is focused, adjusted and controlled by the operator, just as the flame of a welding torch is adjusted by a jeweler. However, compared to welding, laser welding is faster, cleaner and more cost-effective for many manufacturing and repair applications.
Machine dimension of 60w
What material the small jewelry laser welding machine works?
This welding application is great for precious metals, which is why most jewelers in Australia use jewelry laser welding machines.
All traditional jewelry metals can be laser welded:
all base metals
Krakin
Sterling silver
titanium
palladium
platinum
Platinum is one of the most difficult metals in history to machine
and repair, and one of the easiest to laser weld. It is also
possible to weld dissimilar metals together, such as gold to
platinum and sterling silver to gold.
Operating system supported languages: Chinese, Turkish, Arabic,
English, Korean
1. Observation system: The observation system of this jewelry spot
welding machine consists of a microscope and a built-in
high-definition CCD camera. Users can choose one or both of them as
the observation method according to their needs. Both can clearly
observe the welding position of the workpiece, which is convenient
for welding.
2. Adjustment of the CCD cross cursor: If the light spot is not in
the center of the cross cursor in a very clear position of the CCD
camera system, you can change the position of the cross cursor by
clicking the middle position of the four cross cursors. the
sides of the screen so that the solder joint is in the center of
the cursor
3. For welding operations, first ensure that the machine has been
turned on normally, put the workpiece into the sight of the
observation system, and then slowly move to the clearest position
of the observation system.
Point the cursor to the desired welding position, gently step on
the foot switch, the machine has laser output for welding.
4. Parameter adjustment, focusing, after the first welding, the
welding effect of the solder joint does not meet the requirements,
and the parameters need to be adjusted again. Focusing (-3.0-+3.0)
makes the welding effect meet the requirements, and will not repeat
the welding in the future. Needs to be readjusted.
Specification
Size(mm) | L51CM×W29.5CM×H42CM |
Net weight | 28KG |
Total power | 2KW |
Rated power | 60W |
Laser frequency | 1.0~15.0HZ continuously adjustable |
Pulse Width | 0.1~10.0MS grade adjustable |
Aiming and positioning | Built-in camera system 7-inch screen and microscope |
Light spot | 0.15~2.0mm |
Water injection | Automatic pumping |
cooling method | Water cooling |
Welding Samples
Video