Riselaser Technology Co., Ltd |
Verified Suppliers
|
|
Operating system supported languages: Chinese, Turkish, Arabic,
English, Korean
1. Observation system: The observation system of this jewelry spot
welding machine consists of a microscope and a built-in
high-definition CCD camera. Users can choose one or both of them as
the observation method according to their needs. Both can clearly
observe the welding position of the workpiece, which is convenient
for welding.
2. Adjustment of the CCD cross cursor: If the light spot is not in
the center of the cross cursor in a very clear position of the CCD
camera system, you can change the position of the cross cursor by
clicking the middle position of the four cross cursors. the
sides of the screen so that the solder joint is in the center of
the cursor
3. For welding operations, first ensure that the machine has been
turned on normally, put the workpiece into the sight of the
observation system, and then slowly move to the clearest position
of the observation system.
Point the cursor to the desired welding position, gently step on
the foot switch, the machine has laser output for welding.
4. Parameter adjustment, focusing, after the first welding, the
welding effect of the solder joint does not meet the requirements,
and the parameters need to be adjusted again. Focusing (-3.0-+3.0)
makes the welding effect meet the requirements, and will not repeat
the welding in the future. Needs to be readjusted.
Machine dimension
Specification
Model | RL-Y60 |
Maximum Output Power | 60W/80W/100W |
Laser Wavelength | 1064nm |
Maximum Pulse Energy | 40J |
Puls Frequency | 1-15Hz |
Puls Width | 0.1-10ms |
Focal Diameter | 0.1-0.3mm |
Rated Power | ≤2KW |
Power supply | AC220V/50Hz |
Cooling System | Inner Water Cooling |
Machine Details
Application
Micro laser welding machines are mainly used in the jewelry,
eyeglass frame, dental, night guard relining and repair, watch and
golf club industries. It can process all metals used to make
jewelry such as gold, silver, platinum, titanium, steel, palladium
and their alloys. Mainly used in the manufacture and repair of
jewelry, glasses, dentistry, watches and golf clubs, as well as
precision welding of various micro and heat-sensitive components,
such as nickel straps for batteries, hairsprings, leads for ICs.
Advantage
1. High precision Nd:YAG welding system. Wide range of parameter
adjustment
2. Absolutely guarantee the stability of laser beam alignment
3. Easy maintenance: automatic water supply, no need to open the
box
4. Color touch screen display
5. 50 parameter storage bits
6. Gas protection supplier
7. Cooling air conditioner
8. Standard deionization filter
9. Soft and attractive design
Video