High Clear CCD Portable Jewelry Laser Welding Machine FDA Approved
FDA approved High clear CCD Portable Welding Machine For Jewelry
What can a portable Welding Machine For Jewelry do?
This welding machine is specially developed for jewelry laser
welding, mainly used for punching and spot welding of gold and
silver jewelry. Laser spot welding is an important aspect of the
application of laser processing technology. The spot welding
process is heat conduction, the surface of the workpiece is heated
by laser radiation, the surface heat is diffused into the interior
through heat conduction, and the workpiece is melted by control.
The width, energy, peak power and repetition rate of the laser
pulses to form a specific molten pool. Because of its unique
advantages, it is widely used in the processing of gold and silver
jewelry and the welding of small and small parts.
Machine size:
Welding Machine For Jewelry technical data:
Project | content | Mini Jewelry Laser Spot Welder |
1 | Model | Jewelry Laser Welding Machine |
2 | Size(mm) | L51CM×W29.5CM×H42CM |
3 | Net weight | 28KG |
4 | Total power | 2KW |
5 | Rated power | 60W |
6 | Laser frequency | 1.0~15.0HZ continuously adjustable |
7 | Pulse Width | 0.1~10.0MS grade adjustable |
8 | Aiming and positioning | Built-in camera system 7-inch screen and microscope |
9 | Light spot | 0.15~2.0mm |
10 | Water injection | Automatic pumping |
11 | cooling method | Water cooling |
Application of laser welding machine:
Jewelry laser spot welding machine is widely used in aviation,
aerospace, sporting goods, jewelry, golf clubs, medical equipment,
aluminum alloy dentures, instrumentation, electronics, machining,
automobiles and other industries, especially for the opening of
gold and silver jewelry , Welding of spot welds, embedded parts and
claw foot parts
Main configuration:
Crystal: customized version 7*110
Xenon lamp: customized version 8*90*180 (two poles with line)
Power supply: 60W boost power supply
Microscope: Motic
Cavities: Custom Ceramics and Cavities
Chiller: Customized built-in 2.8L water tank for air cooling
60w welding laser machine Video
Operating system supported languages: Chinese, Turkish, Arabic,
English, Korean
1. Observation system: The observation system of this jewelry spot
welding machine consists of a microscope and a built-in
high-definition CCD camera. Users can choose one or both of them as
the observation method according to their needs. Both can clearly
observe the welding position of the workpiece, which is convenient
for welding.
2. Adjustment of the CCD cross cursor: If the light spot is not in
the center of the cross cursor in a very clear position of the CCD
camera system, you can change the position of the cross cursor by
clicking the middle position of the four cross cursors. the
sides of the screen so that the solder joint is in the center of
the cursor
3. For welding operations, first ensure that the machine has been
turned on normally, put the workpiece into the sight of the
observation system, and then slowly move to the clearest position
of the observation system.
Point the cursor to the desired welding position, gently step on
the foot switch, the machine has laser output for welding.
4. Parameter adjustment, focusing, after the first welding, the
welding effect of the solder joint does not meet the requirements,
and the parameters need to be adjusted again. Focusing (-3.0-+3.0)
makes the welding effect meet the requirements, and will not repeat
the welding in the future. Needs to be readjusted.