Shandong Mile Building Materials Co., Ltd |
|
Production Description:
Bituminous Flashing Tape is a Self -Adhesive tape made of a Butyl
& Bitumen Rubber Compund, Self Protected by re-enforced
Aluminum
Foil on one side and Adhesive side is protected by Release Film. Flashing Tape is a simple yet highly effective solution for
waterproofing, sealing and insulation.
Bitumen band sizes
Type | Bitumen flash tape
|
Application | For roofing
|
Thickness | 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3mm,4mm
|
Width | 0.5cm-1.0m
|
Length | 2.5m, 5m,10m,20m or customized
|
Color | White or customized
|
Packing | Carton box
|
Specification data:
No. | |||||||
1 | PE | PET | N | ||||
2 | Water impermeability | 0.2 Mpa 120 min impermeable | -- | ||||
3 | Heat resistance°C | 70 degree No slip, flowing. | |||||
4 | Tensile force N/50mm ≥ | 150 | 150 | 130 | |||
5 | Elongation at break,% ≥ | 250 | 250 | 450 | |||
6 | Low temperature Flexibility | -20°C,No crack.
| |||||
7 | Peel strengthN/mm | Between membranes ≥ | 1.0 | ||||
Between membrane and aluminum plate ≥ | 2.0 | ||||||
8 | Sheer strength N ≥ | 60 | --- | ||||
9 | Stability after heating ≤ | 2% | |||||
10 | Aging after artificial climate | Appearance | No crack, no bubble. | ||||
Tensile retention ,% | 80 | ||||||
Lowtemperature Flexibility | -15°C, No crack. |
Trade items of product:
MOQ | One roll | |||
Delivery Terms | FOB CFR, CIF, EXW | |||
Payment Type | T/T. L/C, Paypal. | |||
Sample | Small Pieces will be offered free. | |||
Delivery Times | Within 7-10 days after receiving the deposit | |||
Port of loading | Qingdao Port |
Features:
1) Safe, easy and fast installation, no naked flame, no binder, no
pollution.
2) Excellent adhesive performance, self-healed property.
3) Anti-puncture, anti-tension, good elongation, anti-corrosion.
4) Good flexibility under low temperature.
5) Widened membranes can reduce loss.
Application:
1) Replacement or repair of flashing
2) Extensions, porches, window frames and chimneys
3)Caravans and conservatories
4) Seals capping bolts and roof ridges
5) Guttering down pipes, skylights
6) Sealing parapets, valley gutters
7) Roof repair of portable building
Construction:
1) Application temperature should be between 5ºC to 45ºC
2) According to required length cut the pieces to the desired and
and size.
3) Place the pieces of membrane on the area to be covered and check
whether they match will be profile of the marked substrate.
4) Peel off the release film and carefully place the membrane
so as to ensure a minimum of 50mm overlap and then smoothen the
membrane from the center to the edges in order to drive out
entrapped air. It is easy to applied to provide instant seal.