Hebei Wire Mesh & Filter Products Co.,Ltd |
|
Model 600 Replacement Shaker Screen Corrugated Screen / Flat Screen
In solid control processing, shale shaker screen plays a key role for eliminating the solids through the screen. So it is imperative that they are prone to damage if not kept properly clean and that will naturally increase the overall project cost.
Here are some useful tips to keep the shaker screen clean and
intact:.
Steel wire brush will actually damage the screen, so stay clear of
brushes in your cleaning process.
The shaker screen constantly sieves the waste material and likely
to get clogged with waste material and as a result the screen holes
will be blinded and hamper the process if filtration. To clean the
blinded screen holes, use the water hose from back side. You could
consider removing the larger particles manually, but never with a
brush or stick, as the mesh of the screen is prone to be torn in
the process if you use any of these.
Make sure that the screens are not left with the drilling waste
i.e. drill cuttings and mud to be dried while in the screen. This
will invariably lead to a pre-mature failure of the equipment.
Never allow any worn out rubbers to be used in the equipment, this
directly lowers the performance of the equipment and damages the
shaker screen.
Do not allow any other material to be placed over the shaker
screens, either in function or in storage.
With these basic cleaning procedures, you could ensure a longer
life for the shaker screen.
Conductance (Kd/mm) | D100 Cut Point (Micron) | API Designation |
---|---|---|
34.11 | 867 | API 20 |
11.86 | 506 | API 30 |
4.65 | 397 | API 40 |
6.77 | 336 | API 45 |
5.23 | 295 | API 50 |
4.60 | 235 | API 60 |
3.12 | 206 | API 70 |
2.55 | 178 | API 80 |
2.26 | 153 | API 100 |
2.07 | 134 | API 120 |
1.81 | 110 | API 140 |
1.35 | 89 | API 170 |
1.05 | 62 | API 230 |
0.68 | 46 | API 325 |