S&G Engineering Solution Lmt. |
|
Steel Profile Z Section Purlin Cold Roll Forming Machine
Company Information
Our factory is located in Shanghai,China,we has been in this feild about 20years,my engineer has a lot of experience on roll forming machine and very professional on it.We produce all kind of roll forming machine,now the fasteset speed can reach 50m/min.
Our product:color steel roll forming machine,roof and wall panel machine,decking floor roll forming machine,floor decing forming mahcine, stud and track roll forming machine, Z and C purlin machine, highway guardrail roll forming machine,cable tray machine, and so on.
Techical description:
1)Decoiler
Decoiler Type: manual decoiler
Weight capacity of decoiler : 5.0T
Inner diameter:350-550mm
Outer diameter:1200mm
2)Feeding and Leveling Device
It used for making the material flat before feeding into the roll
forming machine.
Roller:7rollers, 4up,5down
3)Rolling Forming System
It can change C Z U shape automaticly and different size you just
input data in PLC.
Main motor power: 15kw
Speed of forming: 8-12m/min
Material of roller : Gcr15steel polished and coated with chrome
HRC55-60°
Roller:15 groups rollers
Material of main shaft : High grade No.45 steel after treatment
Diameter of main shaft: ø80mm
Driven:1''chain
4) Hydraulic Punching & Cutting
punching Type: Hydraulic Punching
Punching material: Cr12 steel after treatment
Punching die: Cr12 steel after treament
Cutting material: Cr12 steel after treatment
Hydraulic motor power: 5.5kw
5)Control system
Type: PLC Frequency Control System with touch screen
PLC Brand: Japan Panasonic
Encoder Brand: Omron
Length Error: ±2mm
Technical parameter
Items | Specifications | |
Material of coil | Material Width | 100mm-300mm |
Material Thickness | 2.5-3.0mm | |
Uncoiler | 5 tons manual | |
Forming system | Rolling Speed | 10-15m/min |
Roller Stations | 16 stations | |
Roller Material | Gcr15 steel and quench treatment hardness 55-58, chrome coated 0.05mm | |
Main Motor Power | 15kw | |
Hydraulic cutting Power | 5.5kw | |
Cutting system | Material Of Cutting | Cr12mov |
Tolerance | +-1.5mm | |
Electrical control system | Electric Source | 380V, 50HZ,3 phase |
Control System | PLC (Panasonic) | |
Way Of Drive | chain |
Features & Purposes:
Z-type steel machine strengthens its firmness with an arch type, stabilizes its operation
with gearbox drive, and improves product quality by adopting molding shearing to avoid
port deformations.Products are widely applied in purline set-up of steel-structure houses.
Profile, layout & production flow:
Steel thickness (t): from 1,5 mm to (at least) 3,0 mm;
Profile height (A): as following list
Flange width (B): as following list
Lip width (C): as following list
Minimum finished product length: at least 500 mm;
Maximum finished product length: at least 12000 mm;
Length tolerance: ±1.5mm per each pieces
Coiler loading → feeding-in with guiding (metal sheet is guided
into the first forming station) → straighten → rolling &
forming → hydraulic cutting → stacker running out
Material of main equipment:
Roller material: high grade NO.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm.
Active shaft material: high grade NO.45 carbon wrought steel at diameter 72mm.
Cutting blade: Cr12 mould steel with quenched treatment.
They are widely used as the roof of garden like factory, hotel, exhibition center, villa, civil construction, etc.
Terms
Payment type: 30% T/T prepaid and balance should be paid before
loading
Delivery time: 40days after receving advance payment.
Guarantee period: 18months free service/ pay service all the
machine life
Installation and training:
If buyers visit our factory and check the machine, we will teach
you how to install and use the machine, and also train your
workers/technician face to face.
Without visiting,we will send you user manual and video to teach
you to install and operate.
If buyer needs our technician to go to your local factory,please
arrange board and lodging and other necessary things.
package:
1.As to the roll forming machine's package, it should be nude.
2.we'll protect the machine well before shipment, to prevent
machines from rusting and damage.
Repairs:
Warranty: 1 year since the date of B / L on
Installation and Commissioning:. We will send professional
engineers to buyers' country for installation and commissioning
Buyer pays each engineer 100USD / Day besides the round-tickets,
room and board.
Profile Drawing:
Machine Picture:
Packing & Delivery