42t Punching Cable Tray Roll Forming Machine 0.6-1.2 Mm Thickness

41x41 & 41x21 U shape solar pillar roll forming machine

Specifications:

Configurations	Uncoiling→ (Perforation machine )→Feeding material into machine→ Punching→ Roll forming→ Auto cutting→ Products receiving N.B: you can choose the Perforation machine and punching part as your demand.
Material	Raw material	colored steel plate, galvanized plate
	Thickness	0.6-1.2 mm (As customer`s need)
	Feeding width	300mm-1250mm (According to customer`s profile)
	Material hardness:	550 Mpa---350 Mpa
Manual Uncoiler	Inner Diameter	500-600mm
	Max Coil width	1500mm
	Capacity	5T
Servo feeding and Punching part	Servo feeding power	3kw
	This part to punch the hole, you can change the dies to punch different holes.
	Punching	42T
	Die material	Gcr12MoV quenched
Main Forming machine	Forming steps	18 stations ( Depend on Profiles )
	Shaft diameter	Φ70mm
	Design type	Middle plate welded
	Transmission	Gear box (Chain and gear box depend on thickness and customer`s need)
	Machine frame	350# H steel welded; Steel plate welded/ Memorial arch frame type
	Roller material	Gcr15MoV
	Shaft material	45# steel with tempering
	Cutting blade material	Gcr12MoV quenched
	Working speed	10-16m/min
	Power of machine	18.5KW (According to the thickness)
	Type of cutting	Hydraulic
	Cutting tolerance	±1mm
	Material of blades	Gcr12 quenched
	Cutter quantity	1 set
	Working pressure	20MPA
Hydraulic cutting system	Hydraulic oil	46#
	Hydraulic power	7.5KW
	Cutting length	As required
	Frame	Pillar style with rack & pinion system
	Stroke switch	Non-contact photoelectric switch
	The system includes a set of hydraulic tank, a set of hydraulic oil pump, and two hydraulic pipes. And two sets of electromagnetism valves.
	Hydraulic oil	46#
	Hydraulic power	7.5KW

For the Solar Energy Bracket Main Machine parameters:

1) Forming steps: 18 steps
2) Outer diameter: 70mm
3) Machine frame: memorial arch frame, Thickness of memorial arch frame: 30mm
4) Roller information:
A. Raw material: GCr12MoV
B. Quenched degree: 56-58°C
5) Shaft material: 45# steel with heat treats and hard chrome plated on the surface
6) Main motor power: 18.5kw, Reducer ratio: 1:14, Reducer Type: Hardened reducer
7) With cooling device

Why choose ZT Solar Energy Bracket Machine:

1. High quality roller. This material is made by Gr12 quenching at 58 degree.
2. The shaft we use. It is totally solid, so you do not need to worry, when working; it has bending and effect the accuracy.
3. The gearbox we use. We use gear box as transmission method as your material thickness reached to 3mm. Firstly, it can make sure machine working speed at 16m/min. meanwhile it can make sure machine working long time. By chain, it will loose and break sometime later and by gear, it will work not steady as this.
4. We add water cooling down system to protect machine.

Profil Drawing:

Product Image: