S&G Engineering Solution Lmt. |
|
Company Information
S&G is specialized in building materials of light steel structure.
Since the factory founded 6 years before, it always designs and produces various type profile of roll forming machine.
The main products of factory is Roller shutter door, PU sandwish panel line, pre-painted steel forming machine, Racking
roll forming machine, the cable tray roll forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine,
Floor Deck forming machine, Guardrail forming machine, Down Pipe forming machine, the whole carriage plate for car beam unit,
Steel storage unit, etc. The products are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas and other construction projects,
Our factory can meet the construction enterprises, automobile
industry, Iron and steel production enterprises' growing demands.
S&G machinery is located in Wuxi city, Jiangsu province which
is close to Shanghai, It's about half an hour's journey. We enojoy
the convenient transportation
and advantageous location which supply good business opportunities for the buyers home and abroad.
Detailed Product Description
Main Specifications
Maximum production speed | not less than 15 meters per minute excluding cutting and punching); | ||
Bending precision | the maximum profile deviations (dimensions and shape) shall not
exceed the tolerances specified as following data (or equivalent
tolerances) | ||
Bending quality | ability to bend the profiles of the specified configuration at the
specified maximum steel thickness; cracking of the steel or metal
coating is not permitted for all required steel grades. |
3T hydraulic decoiler | 1set | ||
Feeding→→roll forming-rectify device→Post cutting system | |||
Output table | 2 set | ||
Hydraulic station | 1set | ||
Control desk | 1set | ||
Spare part list | 1set |
thickness | between 0.5mm and 1.2mm GI or carbon steel 195-235Mpa | ||
Coil width | 266mm | ||
width | 126±3 | ||
Flange height (c) | from 12 mm to (at least) 20 mm | ||
Maximum hole diameter deviation | +2 mm/-0 mm | ||
Minimum finished product length | at least 1500 mm | ||
Maximum finished product length | at least 12000 mm | ||
Length tolerance | ±1.5mm per each pieces |
Uncoiler | |||
Dimensions | 1700mm*1000mm*800mm | ||
Width of feeding | 300mm | ||
Capability | 3Ton | ||
Range of expand(by manual) | 420mm—510mm | ||
Mode of expand &fight | inner expand &fight by manual | ||
Way of feeding | manual | ||
Speed controlled by frequency converter brand | Yaskawa | ||
Quantity | 1 |
Feeding | |||
Armed adjustable center of the forming rollers and of sufficient
length to prevent lateral movement of the strip on its entry to
punching | |||
Feeding type | adjustable | ||
Feeding width range | 10-25mm | ||
Entrance and guide roller | diameter is ¢65mm, material is sae1045, surface with chrome | ||
Quantity | 1 |
Feeding | |||
Armed adjustable center of the forming rollers and of sufficient
length to prevent lateral movement of the strip on its entry to
flattener. | |||
Entrance table-guide | adjustable | ||
Entrance width range | 250-270mm | ||
Entrance and guide roller | diameter is ¢65mm, material is sae1045, surface with chrome |
Forming Section | |||
Thickness range | 0.8-1.2mm | ||
Main motor power | 4kw, AC motor, motor inside of main machine (Brand: Guomao of
China) | ||
Machine Voltage, Frequency, Phase | 380 V, 50 Hz, 3Phase | ||
Roll station | 10stations +1 station of rectify | ||
Roller material | SAE1045, hardness and chrome plated surface | ||
Shaft diameter | ¢56mm material: SAE1045 | ||
Working type | up shaft is initiative, down shaft is passive | ||
Machine roll forming speed | 15m/min | ||
Transmission | by chain, 1.0inch double line | ||
Quantity | 1 |
Rectify device | |||
Function | for revise the end product up and down/ left and right to
straightness | ||
Roller material | Roller material: GCR15 quenched 58°-62°finishing turning CNC | ||
Quantity | 1 |
Post cutting system | |||
Hydraulic power | 3KW | ||
Hydraulic working pressure | 10Mpa | ||
Cutting after forming | Cut the sheet after roll forming to required length | ||
Material of blade | Cr12 with heat treatment 58-60°2 sets cutter | ||
Length measuring | Automatic encoder length measuring, brand: Omron | ||
Tolerance of length | 3000mm+/- 1.5mm |
output table | |||
Table for reception of the cut profiles | with roller transporter allowing to unload the cut profile freely,
total unit length after assembly ,at least 12,000 mm | ||
Unloading of the finished products from the table of cut profiles | manual | ||
Frame | welding by tube | ||
Size | about 2.0m long*0.3mwide*0.9mhigh | ||
Supporter roller | ASTM 1045 with chrome | ||
Diameter of rollers | 55mm | ||
Quantity | 2 units |
Hydraulic station | |||
Hydraulic power | 3kw | ||
Working pressure | 10Mpa adjustable | ||
Solenoid valve | 1 group | ||
Hydraulic oil | 46# hydraulic oil | ||
Quantity | 1 |
Control desk | |||
Programmable setting of profile dimensions | to be provided | ||
Setting of distances between the perforation holes in the
transversal direction of the profile | to be provided, according to the approved drawing | ||
Operating system language | English and Russian. | ||
Voltage, Frequency, Phase | 380 V, 50 Hz, 3Phase | ||
Control panel | Button-type switch and touch screen | ||
Unit of length | millimeter (switched on the control panel) | ||
PLC brand | Panasonic | ||
Frequency converter brand | Yaskawa | ||
Touch screen | Taiwan Weinview |
Competitive Advantage:
Product Images:
Machine Images: