|
[China]
Trade Verify
Address: A-709 Zhengshang International Building, Fengcheng 8 Road,Xi'an,China
Contact name:Shirley
Shaanxi Fortune Industries Co.ltd |
|
Verified Suppliers
|
|
|
Thrust Radial Plain Spherical Bearings GE12E
The composition of the spherical plain bearings: the sliding contact surface is a spherical surface, consisting of an outer spherical inner ring and an inner spherical outer ring. Spherical plain bearings are mainly used for slewing, tilting and low-speed rotary bearings.
As long as the joint bearing has: angular contact joint bearing, thrust joint bearing, radial joint bearing, stalk end joint bearing. The classification of joint bearings is mainly based on the direction of the load they can bear, the nominal contact angle and the structural type.
Shperical Plain Bearing are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery and other industries
Joint Bearing GE12ES Information | |
Brand Name | according to your requirement |
Model Number
| Joint Bearing GE12 ES |
| Bore Sizes | 12mm |
| Outside Diameter | 22mm |
| Bearing Weight | 0.0015 kg |
Material
| Chrome steel, Gcr15 |
Vibration Level code
| V1,V2,V3,V4 |
Precision
| P0,P6,P5,P4,P2 |
Cage Type
| Brass Cage,Steel Cage,Nylon Cage |
Guarantee
| 50000km Or One year |
Delivery Detail
| 3-10 days upon receipt of deposit |
Shipping | Express: DHL Fedex EMS /By Sea |
| Application | Applies only to withstand side of the axial load, the speed on the lower parts, such as crane hooks, vertical pumps, vertical centrifuge, jack, speed reducer and so on. Shaft bearing ring, seat ring and rolling elements are separated, you can dismantle respectively. |
Joint Bearing Introductions:
The joint bearing is a spherical plain bearing. The sliding contact surface is an inner spherical surface and an outer spherical surface. It can be rotated and oscillated at any angle during movement. It is treated with various special processes such as surface phosphating, blasting, inserting and spraying. The method is made. The joint bearing has the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self-aligning, and good lubrication. The structure of the joint bearing is simpler than that of the rolling bearing, and it mainly consists of an inner ring having an outer spherical surface and an outer ring having an inner spherical surface. Joint bearings are generally used for low-speed oscillating motion (ie angular motion). Since the sliding surface is spherical, it can also be tilted within a certain angle range (ie, aligning motion), and the support shaft and the shaft hole are not concentric. When the degree is large, it still works normally.
Joint Bearings Series:
GE...E type: single outer ring, no lubrication tank. Can withstand radial loads and small axial loads in either direction.
GE...ES type: single seam outer ring with lubrication groove. Can withstand radial loads and small axial loads in either direction.
GE...ES-2RS type, GEEW...ES-2RS type: single-slit outer ring with lubrication groove and sealing ring on both sides. Can withstand radial loads and small axial loads in either direction.
GE...ESN type: single-slit outer ring, GE...XSN type: double-slit outer ring (split outer ring) with lubricating oil groove and outer ring with retaining groove. Can withstand radial loads and small axial loads in either direction. However, when the axial load is received by the retaining ring, its ability to withstand axial loads is reduced.
