|
[China]
Trade Verify
Address: Building 2#,No.1000 Tiangong Avenue,Xinxing Street,Tianfu New Area,Chengdu Sichuan Province, 610213, China
Contact name:Zander
Sichuan Trixon Communication Technology Corp.,Ltd |
|
Verified Suppliers
|
|
|
TSS-GEL2-55DCR is a 1.25G SFP 120km transceiver, suitable for single-mode optical fiber transmission. The transceiver supports an operating temperature range of -5°C to +70°C and uses a 1550nm DFB (distributed feedback) laser as the light source.
| Parameter | Value |
|---|---|
| Connector Type | Duplex LC Connector Interface |
| Laser | 1550nm-DFB |
| Pluggable | Hot Pluggable |
| Distance | 120km |
| Data Rate | Operating Data Rate Up To 1.25 Gbps |
| Power Supply | Single 3.3V Power Supply And TTL Logic Interface |
| Fiber Type | SMF |
| Product Name | 1.25G GBE SFP Transceiver |
| Compliant | Compliant With MSA SFP Specification SFF-8472 |
| Temperature Range | -5℃ ~+70℃ |
( 1550nm DFB and PIN, 120Km)
| Parameter | Symbol | Min | Typ. | Max | Unit | Note | ||
| Transmitter | ||||||||
| Centre Wavelength | λc | 1530 | 1550 | 1570 | nm | |||
| Spectral Width*Note4 | ∆λ | 1 | nm | DFB-LD | ||||
| Average Output Power | POUT | 0 | +5 | dBm | ||||
| Extinction Ratio | ER | 9 | dB | |||||
| Average Power of OFF Transmitter | POFF | -45 | dBm | |||||
| Output Optical Eye | Compliant with IEEE 802.3ah-2004 | |||||||
| Receiver | ||||||||
| Centre Wavelength | λc | 1200 | 1650 | nm | ||||
| Sensitivity*Note5 | PIN | -31 | dBm | APD | ||||
| Receiver Overload | Overload | -8 | dBm | |||||
| Optical Return Loss | 12 | dB | ||||||
| LOS Assert | LOSA | -45 | dBm | |||||
| LOS De-Assert | LOSD | -32 | dBm | |||||
| LOS Hysteresis | 0.5 | 4 | dB | |||||
Note4: VSCEL LD and FP LD measured spectral width RMS, DFB LD measured spectral width –20dB.
Note5: Minimum average optical power measured at the BER less than 1E-12@pattern is PRBS27-1@ER=9dB.
Fiber optic backbone network: TSS-GEL2-55DCR transceiver can be used to build fiber optic backbone networks, connect different network nodes, and achieve long-distance transmission and high-speed data transmission.
Long-distance communication: Since it supports a maximum transmission distance of 120 kilometers, this transceiver is suitable for long-distance communication needs, such as metropolitan area network expansion, optical fiber access network, etc.
Data center interconnection: In data centers, the TSS-GEL2-55DCR transceiver can be used to interconnect optical fiber links between different data centers to meet the needs of data backup, disaster recovery and data sharing.
Industrial applications: Since it is suitable for the operating temperature range of -5℃ to +70℃, the transceiver can be used in general industrial environments and is suitable for industrial automation, monitoring systems, industrial networks and other fields.
Connector Type: The TSS-GEL2-55DCR transceiver typically comes with a standard LC connector. However, if you have specific requirements for a different connector type, such as SC or ST, you can discuss with the manufacturer if they offer customization options to provide the desired connector type.
DDM/DOM Support: Digital Diagnostic Monitoring (DDM) or Digital Optical Monitoring (DOM) is a feature that allows monitoring the performance and health of the transceiver, including parameters like temperature, voltage, and optical power levels. If this feature is essential for your application, you can inquire about the availability of DDM/DOM support for the TSS-GEL2-55DCR transceiver.
Labeling and Branding: Depending on your requirements, it may be possible to have custom labeling or branding on the transceiver module. This can be useful for identification and branding purposes within your network infrastructure.
Extended Temperature Range: The TSS-GEL2-55DCR already has a specified operating temperature range of -5℃ to +70℃. If you have specific temperature requirements beyond this range, you can discuss with the manufacturer if they offer customization options for even higher or lower temperature ranges.
Additional Features: You can also inquire about the possibility of adding additional features or functionalities to the transceiver based on your specific requirements. This could include features like power monitoring, diagnostic capabilities, or enhanced security measures.
We offer premium technical support and services for our SFP Transceiver Module. Our team of experts can provide troubleshooting, installation, and configuration assistance. Additionally, we provide detailed product information and manuals to help you get the most out of your product.
Our team is available 24/7 to help you resolve any issues quickly.
SFP Transciver Module is packed in an antistatic bag and placed in a box. The box is then placed in a cardboard shipping box, padded with packing material, and sealed with packing tape. Shipping labels should be affixed to the outer box.
To ensure safe delivery, the shipping box should include cushioning material such as bubble wrap, foam, or other suitable material. The SFP Transciver Module should be packaged securely to avoid damage during transit.
When shipping, the package should be marked “Fragile” and “Handle with Care”. It should also be marked as “This Side Up” to ensure that the package will be handled properly during shipping.
Reference Datasheet File code: DS040049
