Active Member
|
[China]
Address: 3rd Industrial Area, Shanmen Community, Songgang Town, Bao'an District, Shenzhen City 518105, Guangdong Province, China
Contact name:Johnson Gao
Shenzhen GLGNET Electronics Co., LTD |
|
|
Press Fit Dual Port QSFP14 SFP Cage Assembly EMI Gasket For 56G Ethernet
QSFP transceivers are available with a variety of transmitter and receiver types, allowing users to select the appropriate transceiver for each link to provide the required optical reach over multi-mode or single-mode fiber. QSFP modules are commonly available in several different categories:
4 x 1 Gbit/s QSFP
The original QSFP document specified four channels carrying Gigabit Ethernet, 4GFC (FiberChannel), or DDR InfiniBand.
4 x 10 Gbit/s QSFP+
QSFP+ is an evolution of QSFP to support four 10 Gbit/sec channels carrying 10 Gigabit Ethernet, 10GFC FiberChannel, or QDR InfiniBand. The 4 channels can also be combined into a single 40 Gigabit Ethernet link. It is usually for the application of Data center, 40G Ethernet, Infiniband, and other communications standards.
4 x 14 Gbit/s QSFP+ (QSFP14)
The QSFP14 standard is designed to carry FDR InfiniBand, SAS-3. or 16G Fibre Channel
4 x 28 Gbit/s QSFP+ (QSFP28)
The QSFP28 standard is designed to carry 100 Gigabit Ethernet, EDR InfiniBand. or 32G Fibre Channel. This transceiver type is also used with direct-attach breakout cables to adapt a single 100GbE port to four independent 25 gigabit ethernet ports (QSFP28-to-4x-SFP28). Sometimes this transceiver type is also referred to as "QSFP100" or "100G QSFP" for sake of simplicity.
1. GLGNET QSFP Cage ( 48003-00N011 ) Structure:
| Product Name | 1 x 2 ports QSFP14 Cage with EMI Gasket, without Integrated Interface |
| QSFP Cage Length | 55.4 mm |
| QSFP Cage Width | 43.4 mm |
| QSFP Cage Height | 14.65 mm |
| QSFP Cage Press Fit Pin Length | 2.05 mm |
| QSFP Cage Single Port Width | 18.75 mm |
| QSFP Cage Single Port Height | 8.95 mm |
| Appearance | Stampled and Formed Metal Cage, with heat dissipation hole |
| Light Pipes | Without, can be customized as required |
| Heat Sink | Without, can be customized as required |
| Monut Type | Press Fit Mount Type |
| Cage Materials | Copper Alloy |
| EMI Finger Spring | Without, can be customized as required |
| EMI Gasket | Yes |
2. GLGNET QSFP Cage ( 48003-00N011 ) Advantages
| Item | Benefits |
| MT design packaged in tape and reel | Ensures easy pick-and-place to the PCB |
| Single port cages available in press-fit, solder-post and PCI (1°) versions; ganged cages available in press-fit version | Enables use with various board thicknesses and assembly processes |
| Press-fit tails accommodates belly-to-belly applications for single and ganged cages | Ensures best use of PCB real estate |
| Modules oriented "belly-to-belly" when inserted | Easy of removal of the module from the port |
| Integrated light pipes for use with SMT Light Emitting Diode's (LED's) | Provides port status and activity feedback to the user |
| Unique thumb latch | Provides intuitive squeeze and pull-latching mechanism |
| Press-fit termination to PCB | Eliminates soldering, lowering the applied cost and avoiding solder-related issues |
| Ganged cages have 360° elastomeric gaskets, spring fingers and multiple ground-pin locations | Provides advanced EMI shielding to the bezel |
| Elastomeric or metal gasket | Two options for superior EMI protection |
| Zinc diecast backshells | Provide 360° Electro Magnetic Interference (EMI) shielding |
3. GLGNET Series SFP Cage Products
| By Protocol | SFP Series | SFP Cages |
| SFP Plus Cages | ||
| SFP28 Series | SFP28 Cages | |
| QSFP Series | QSFP Plus Cages | |
| QSFP14 Cage | ||
| QSFP28 Cages | ||
| Female Connectors | SFP Female Connectors | |
| SFP Plus Female Connectors | ||
| QSFP14 Female Connectors | ||
| By Structure | SFP Series | 1 x 2, 1 x 4, 1 x 6; 2 x 1, 2 x 2, 2 x 4, 2 x 5, 2 x 6, 2 x 8 |
| SFP Plus Series | 1 x 2, 1 x 4, 1 x 6; 2 x 1, 2 x 2, 2 x 4, 2 x 6, 2 x 8 | |
| SFP28 Series | 1 x 1, 1 x 4 | |
| QSFP Plus Series | 1 x 1 | |
| QSFP14 Series | 1 x 2 | |
| QSFP28 Series | 1 x 1 | |
| SFP Female Connectors | 20pin | |
| SFP Plus Female Connectors | 20pin | |
| QSFP14 Female Connectors | 38pin |
Custom Service is Available
The SFP Cage can be with EMI Tabs, EMI Gasket, Heat Sink, and Light pipes as required;
4. GLGNET Customization Service
5. GLGNET QSFP Cage ( 48003-00N011 ) Features
Available with single or multi-port (panel mount) cages
Convenient kit with QSFP connector / Interface and cage
3D foot design for improved press-fit retention and contact to host board holes
One-piece, stainless steel construction
Low emission design via fold-back spring fingers – no openings for radiation to pass through
Enhanced transceiver kick-out springs
Simple and fast installation / removal
Host board holes not damaged when cage is removed
Mates with QSFP14 transceivers
Connectors and cage available
Press-fit or through-hole solder leads on cages
Available individually or as a kit (SFPK Series)
Heat transfer windows on all SFP cage surfaces
Supports MSA compliant host board layouts and transceiver designs
6. GLGNET Advantages:
7. GLGNET QSFP Cage ( 48003-00N011 ) Applications:
| By Structure | QSFP Female Connector |
| QSFPTransceiver ( with Fiber Cable ) | |
| By Function | Servers |
| Storages | |
| Switches | |
| Routers | |
| By Protocol | Telecommunications |
| Data/Communications | |
| Networking | |
| Fibre Channel and Gigabit Ethernet |
8. Mechnical Drawing
You can know the Demensions Details from Following Drawing
