10GBASE-ZR SFP+ Optics Module, up to 80km over duplex SMF Juniper Compatible

10GBASE-ZR SFP+ Optics Module, up to 80km over duplex SMF Juniper Compatible

Product description
The SFP-1080-ZR is a long haul single-mode 10G SFP+ optical module compatible with the 10GBase-ZR specifications.
It uses a cooled EML laser transmitter at 1550nm and an APD photodiode. Line rate of transceiver is 10.3125Gbps.
Tested and found compatible on various 10G Ethernet switches to make sure the performance.

Features
1. Compliant with SFF-8431 and IEE802.3ae
2. Data rate selectable ≤4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
3. Cooled EML transmitter and APD receiver
4. Link length up to 80km
5. Low Power Dissipation

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =--40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured with worst ER=9dB

2. PRBS 2^{31 – 1} and BER<10^-12@10.3125G

Applications

● 10G Base-ZR

● 10G Fiber Channel

● SONET, SDH networks

● 10G Ethernet 

Compatibility

Olinkcom's Juniper Compatible 10GBASE-ZR SFP+ transceiver can be worked with the below Juniper networks equipment.