|
[China]
Trade Verify
Address: F4, Building B, No.2, Taishan Road, Xinwu District, Wuxi, Jiangsu province, China
Contact name:Shirley
Wuxi CORONA Electronic & Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Corona GR7FA 2.4ghz futaba fasst rc car transmitter and receiver
CORONA GR7FA receiver can support some mode. And it has gyroscopic stability enhancement function.
It also can support sbus function . Support gyro function switch on and off in flying by Switching signal of CH5.
It's very popular with our customer .
We can also provide OEM servive , if you need pls let me know .
| Product model | GR7FA |
| Compatibility | TM7, TM8, TM10, TM14 or T6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG,14SG,18MZ |
| Operating Current | 70mA max |
| Operating Voltage | 3.6~8.5V |
| Latency | 14mS @ FASST multi-channel mode /16mS @ FASST 7ch mode |
| Sensitivity | about -96dBm |
| Weight | 16g |
CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver is designed
to use with FUTABA
FASST 2.4GHz transmitters, such as TM7, TM8, TM10, TM14 or
T6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG,14SG,18MZ
Feature:
Mode supply: No mixer, Dual-aileron, V-tail mixer, Delta mixer
Independent simple gyro gain adjustment for Aileron, Elevator and
Rudder
S.BUS output support expanding servo channels.
Specifications:
Voltage Range :3.6~8.5V
Operating Current: 70mA max
Operation temperature: -10~70 degC
Latency: 14mS @ FASST multi-channel mode /16mS @ FASST 7ch mode
Sensitivity: about -96dBm
Weight: 16g
Bind procedure:
Turn on the FASST transmitter
Connect the battery to the receiver while pressing receiver’s F/S
button.
Installation Guide:
Make sure that your plane has good status before installing GR7FA and other electrical device on it.
The receiver need to be firmly mounted near the gravity of the plane by double side tape, refer to illustration below.
Ensure the axis direction is out of four kind types description below. Fixed GR7FA reference the information mentioned in axis description pictures on receiver’s box.
Turn on FASST transmitter, turn off any mixer feature on the
transmitter, firstly set stick trimming and sub-trim parameters to
zero .Preset all sensitivity at about 40~60%, Select the proper
mode 
of mixer on GR7FA and power on it, check and adjust aileron,
elevator or rudder to the neutral position of control surface.
Adjustment can be done by stick trimming on the transmitter. If mode selection and sensitivity changed, please power the GR7FA again to let new
feature take effect.
Check all servo controlling that you need under flying is correct. Reverse the servo direction on the transmitter if need. Roll the model along the x, y or z axis alone to check the compensation direction that you want as the picture show.
If compensation direction is reversed, set the sensitivity value reverse. If any sensitivity changed,please power the GR7FA again to let new feature take effect.
Corona Electronics and Technology CO.,LTD is one of the leading professional receiver and servo manufacturers in China.Corona boasts the lightest,smalllest and most reliable receivers and servo with the greatest range in the RC world.We specialize in designing and manufacturing Servos and 2.4GHz combos for Futaba and JR radios . As an export-oriented company , Corona has excellent international distribution channels and our products are sold to more than 40 countries around the world.Corona is based in Wu Xi City which is very close to Shanghai.If you come to China,you are very welcome to visit our office and our factory.
Our motto at Corona is Technological innovation & striving for
perfection.We will continue to grow and strive to produce original,
innovatively engineered,top quality products to share with the RC
World.
1. Why choose us?
We are one of the leading professional receiver and servos
manufacturers in china and we have been in this industry for almost
14 years. Most of all, we have own factory. The product cost is
competitive.
2.What is your terms of payment?
For payment, we accept payment by T/T, paypal, Alibaba trade
assurance.If you want any other payment term, please let us know
before you place an order.
3. Which shipping service is better?
For shipping ways, there are many shipping ways that you can choose
For example, sea shipping, China post, China airmail, EMS. DHL,
Fedex, UPS, and TNT ect.
4. How about your delivery time?
Most of our products are in stock, so we can have your goods
shipped within 3 days after payment.
5. What is your terms of delivery?
EXW,FOB,CFR,CIF,DDU.
6.Do you test all your goods before delivery?
Yes,we have 100% test before deliver.
7. What is your sample policy?
We can supply the sample,but you pay the sample cost and The
shipping fee.
8. Can you produce according to the samples?
Yes, we can produce with your samples or technical drawings.
