|
[China]
Trade Verify
Address: No. 411, Jianlin Road, Suzhou New District, Suzhou, China
Contact name:Fiona Luo
Suzhou Tongjin Precision Industry Co., Ltd |
|
Verified Suppliers
|
|
|
Long Working Life Servo Electric Cylinder With Many Load Connection Types and Ball Screw Drive
pictures..............................................
Example: TJER160 S300 B R 05 A M C 10 05 0 P11 O/C N/P
TJER160—Series No.
TJER190 TJER220 TJER250 | S300—Effective Stroke
TJER160:50~1500mm TJER190:50~2000mm TJER220:50~2500mm TJER250:50~3000mm | B—Screw Type
B:Ball Screw C:Roller Screw |
R—Anti-rotation
T:Without | 05—Screw Lead TJER190:10,20mm TJER220:10,20mm TJER250:10,20mm | A—Motor Mounting Type B:Parallel |
M—Cylinder Mounting Type
M1:Double side mount M2:Side turnnion mount M3:Front flange mount M4:Rear flange mount M5:Rear clevis mount M6:Rear shaft mount MX:Customized
| C —Load Connection Type
C1:Male C2:Female C3:U-bolt C4:Ball head hinge CX:Customized | 10—Power
01:100W 02:200W 04:400W 08:750W 10:1000W 20:2000W 30:3000W |
05—Reduction Ratio
05:Five-to-one 10:Ten-to-one 20:Twenty-to-one | 2—Number Of Limit Switches
(Default is normally open NPN switch) | O/C—Limit Switches
O:Normally Open C:Normally Close
|
N/P—Sensing Type
N:NPN P:PNP |
Mark:
1) In order to ensure the effective stroke, two ends need to be reserved 5mm space.
2) The sensor couldn’t be mounted on the same side of the motor when the motor is parallel mounted.
2.Electrical Servo Cylinder Drive Torque And Power Selection Table
| Motor connection | Parallel (belt drive) | ||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | 10 | ||||||||||||||
| Screw Lead | [mm] | 10 | |||||||||||||||||
| Motor Power | [KW] | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | |||
| Motor Rated Torque | [N.M] | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | |||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | |||
| Cylinder Rated Force | [KN] | 9.25 | 14.56 | 19.84 | 13.88 | 21.84 | 29.76 | 27.75 | 43.68 | 59.52 | 46.26 | 72.8 | 99.2 | 92.51 | 145.6 | 150 | |||
| Cylinder Max. Force | [KN] | 150 | |||||||||||||||||
| Cylinder Speed | [mm/s] | 0-250 | 0-220 | 0-110 | 0-65 | 0-30 | |||||||||||||
| Motor connection | Linear (coupling direct drive) | |||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | 10 | |||||||||||||||
| Screw Lead | [mm] | 10 | ||||||||||||||||||
| Motor Power | [KW] | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | |||||||
| Motor Rated Torque | [N.M] | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | |||||||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | |||||||
| Cylinder Rated Force | [KN] | 9.25 | 14.56 | 19.84 | 27.75 | 43.68 | 59.52 | 46.26 | 72.8 | 99.2 | 92.51 | 145.6 | 150 | |||||||
| Cylinder Max. Force | [KN] | 150 | ||||||||||||||||||
| Cylinder Speed | [mm/s] | 0-250 | 0-220 | 0-110 | 0-65 | 0-30 | ||||||||||||||
| Motor connection | Parallel (belt drive) | ||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | 10 | ||||||||||||||
| Screw Lead | [mm] | 20 | |||||||||||||||||
| Motor Power | [KW] | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | |||
| Motor Rated Torque | [N.M] | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | |||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | |||
| Cylinder Rated Force | [KN] | 4.63 | 7.27 | 9.92 | 6.94 | 10.91 | 14.88 | 13.88 | 21.82 | 29.75 | 23.13 | 36.36 | 49.59 | 46.26 | 72.72 | 99.18 | |||
| Cylinder Max. Force | [KN] | 100 | |||||||||||||||||
| Cylinder Speed | [mm/s] | 0-250 | 0-220 | 0-110 | 0-65 | 0-30 | |||||||||||||
| Motor connection | Linear (coupling direct drive) | |||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | 10 | |||||||||||||||
| Screw Lead | [mm] | 20 | ||||||||||||||||||
| Motor Power | [KW] | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | 3.5 | 5.5 | 7.5 | ||||
| Motor Rated Torque | [N.M] | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | 16.7 | 26.25 | 35.81 | ||||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | ||||
| Cylinder Rated Force | [KN] | 4.63 | 7.27 | 9.92 | 6.94 | 10.91 | 14.88 | 13.88 | 21.82 | 29.75 | 23.13 | 36.36 | 49.59 | 46.26 | 72.72 | 99.18 | ||||
| Cylinder Max. Force | [KN] | 150 | ||||||||||||||||||
| Cylinder Speed | [mm/s] | 0-250 | 0-220 | 0-110 | 0-65 | 0-30 | ||||||||||||||
3. Applications
★ Military equipment:radar, missile erector, armored vehicle swing platform, special equipment and other warships and aircraft hatch,opening, seat height adjustment, weapon tracking system,actuator,experimental lifting support, tank artillery high and low direction action adjustment, The push of rocket fuel, the opening of furnace door, etc.
★ Special equipment:industrial automation production line, assembly line, logistics transmission, lifting platform, offset control, valve control, coordinate manipulator, mechanical equipment CT Kama knife, food and medicine industry, CNC machine tools, industry packaging machine, Automotive electronic press, textile equipment winding machine indexing, die position control, clamping, drilling, positioning.
★ Experimental Equipment: Simulation platform, test bed, wave machine, testing equipment etc.
This type is especially suitable for :
servo pressing, motor assembly production line and you can also purchase our servo pressing software together.
pictures...................................
4. Compared With Hydraulic Cylinder & Pneumatic Cylinders
| Items | Electric cylinder | Hydraulic cylinder | Pneumatic Cylinders | |
Cost comparison | Operations | Convenient | Complex | Complex |
Environment influence | Environmental | Oil leak | High noise | |
| Safety | Safe | Oil leak | Gas leak | |
| Energy loss | Low loss | High loss | High loss | |
| Lifetime | Very Long | Can be long with proper maintenance | Can be long with proper maintenance | |
| Cost performance | Excellent | Ordinary | Ordinary | |
| Maintenance | Almost maintenance free | Frequent & high cost | Regular & high cost | |
Function comparison | Velocity | Very high | Medium | High |
| Acceleration | Very high | Medium | High | |
| Rigidity | Very high | Low | Low | |
| Load ability | High | High | Medium | |
| Shock resistance ability |
Good |
Good |
Ordinary | |
| Efficiency | ＞90% | ＜50% | ＜50% | |
| Location control | Easy | Hard | Hard | |
| Location precision | Very high | Medium | Medium |
5. Maintenance
Electric cylinder is refueled with lubricating grease GB7324-1994 general lithium base 3 lubricating grease when leaves factory. After electric cylinder has run for 300 hours, refill the lubricating grease. Refueling frequency, per 2000hours one time as usual, it is determined on basis of the operating environment and day-to-day operational time. Refueling method: open the filler hole on the shell of electric cylinder, turn the screw to find the filler hole on the screw nut and refuel lubricating grease. Requirement for lubricating grease:GB7324-1994 general lithium base 3 lubricating grease.
