|
[China]
Trade Verify
Address: No. 411, Jianlin Road, Suzhou New District, Suzhou, China
Contact name:Fiona Luo
Suzhou Tongjin Precision Industry Co., Ltd |
|
Verified Suppliers
|
|
|
Compact Structure Mini Servo Electric Cylinder With Exclusive Software,50~200mm Linear Actuator,ISO 9001:2008
The electric cylinder is a linear motion that converts the rotating
motion of the motor into the push rod through the rotating motion
of the screw and the screw pair.
By using the closed-loop control characteristic of servo motor, the
precision control of thrust, speed and position can be realized
conveniently, and the program can be realized by using modern
motion control technology, numerical control technology and bus
(network) technology. Because of its control and convenience, it
can realize the precision motion control that cylinder and
hydraulic cylinder drive can not realize.
Example: TJE075 S100 B R 05 A M C 2 P11 O/C N/P
TJE075—Series No.
TJE040:44×44mm TJE065:64×64mm TJE075:75×75mm TJE095:93×93mm TJE110:111×111mm TJE135:134×134mm | S100—Effective Stroke
TJE040:50-200mm TJE065:50-250mm TJE075:50-600mm TJE095:50-800mm TJE110:50-1000mm TJE135:50-1200mm |
B—Screw Type
A:Acme Screw B:Ball Screw C:Roller Screw | R—Anti-rotation
R:With T:Without(TJE040 always without this function ) |
05—Screw Lead
TJE040:4mm TJE065:4, 5, 10, 16,20mm TJE075:4, 5, 10, 20, 40mm TJE095:4, 5, 6, 8, 10, 25mm TJE110:5, 6, 8, 10, 20, 32mm TJE135:10, 20, 50mm | A—Motor Mounting Type
B:Parallel |
M—Cylinder Mounting Type
M1:Double side mount M2:Side turnnion mount M3:Front flange mount M4:Rear flange mount M5:Rear clevis mount M6:Rear shaft mount MX:Customized | C —Load Connection Type
C1:Male C2:Female C3:U-bolt C4:Ball head hinge CX:Customized |
2—Number Of Limit Switches
(Default is normally open NPN switch) | O/C—Limit Switches
O:Normally Open C:Normally Close |
N/P—Sensing Type
N:NPN P:PNP |
| Grating ruler + Force sensor |
Force sensor:① 4-20mA ② 0-10V Grating ruler:① TTL 24V ② RS422(5V Difference) |
If lacking of the part,it means without either grating ruler or force sensor. P01:Only with grating ruler TTL(24V) P10:Only with grating ruler 4-20mA |
Mark:
1) In order to ensure the effective stroke, two ends need to be reserved 5mm space.
2) The sensor couldn’t be mounted on the same side of the motor when the motor is parallel mounted.
| Motor connection | Parallel (belt drive) | ||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | |||||
| Screw Lead | [mm] | 4 | |||||||
| Motor Power | [KW] | 01 | 0.15 | 0.1 | 0.15 | 0.1 | 0.15 | 0.1 | 0.15 |
| Motor Rated Torque | [N.M] | 0.32 | 0.48 | 0.32 | 0.48 | 0.32 | 0.48 | 0.32 | 0.48 |
| Motor Rated Speed | [r/min] | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
| Cylinder Rated Force | [KN] | 0.45 | 0.65 | 0.65 | 0.65 | 0.65 | 0.65 | 0.65 | 0.65 |
| Cylinder Max. Force | [KN] | 0.65 | |||||||
| Cylinder Speed | [mm/s] | 0-200 | 0-130 | 0-65 | 0-40 | ||||
| TJE040 series electrical servo cylinder drive torque and power selection table | |||||||||
| Motor connection | Linear (coupling direct drive) | ||||||||
| Reduction ratio | 1 | 1.5 | 3 | 5 | |||||
| Screw Lead | [mm] | 4 | |||||||
| Motor Power | [KW] | 01 | 0.15 | 0.1 | 0.15 | 0.1 | 0.15 | 0.1 | 0.15 |
| Motor Rated Torque | [N.M] | 0.32 | 0.48 | 0.32 | 0.48 | 0.32 | 0.48 | 0.32 | 0.48 |
| Motor Rated Speed | [r/min] | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
| Cylinder Rated Force | [KN] | 0.45 | 0.65 | 0.65 | 0.65 | 0.65 | 0.65 | 0.65 | 0.65 |
| Cylinder Max. Force | [KN] | 0.65 | |||||||
| Cylinder Speed | [mm/s] | 0-200 | 0-130 | 0-65 | 0-40 | ||||
★ Military equipment:radar, missile erector, armored vehicle swing platform, special equipment and other warships and aircraft hatch,opening, seat height adjustment, weapon tracking system,actuator,experimental lifting support, tank artillery high and low direction action adjustment, The push of rocket fuel, the opening of furnace door, etc.
★ Special equipment:industrial automation production line, assembly line, logistics transmission, lifting platform, offset control, valve control, coordinate manipulator, mechanical equipment CT Kama knife, food and medicine industry, CNC machine tools, industry packaging machine, Automotive electronic press, textile equipment winding machine indexing, die position control, clamping, drilling, positioning.
★ Experimental Equipment: Simulation platform, test bed, wave machine, testing equipment etc.
This type is especially suitable for :
food service industry(compared with hydraulic cylinder&pneumatic cylinder,it is much clenaner).
| 1.Compact structure and small dimension. |
| 2.High rigidity, low inertness and fast response. |
| 3.High reliability and long operating life. |
| 4.Energy saving&less noise. |
| 5.Convenient assembly and use,simple maintenance. |
| 6.One years of quality assurance, life - long maintenance service. |
