|
[China]
Trade Verify
Address: No. 411, Jianlin Road, Suzhou New District, Suzhou, China
Contact name:Fiona Luo
Suzhou Tongjin Precision Industry Co., Ltd |
|
Verified Suppliers
|
|
|
Linear Actuator Match With Many Different Screw Leads,Heavy Load Servo Electric Cylinder Up To 350KN
1. Product Model Definition
Example: TJER220 S800 B R 05 A M C 20 05 0 P11 O/C N/P
TJER220—Series No.
TJER190 TJER220 TJER250 | S800—Effective Stroke
TJER160:50~1500mm TJER190:50~2000mm TJER220:50~2500mm TJER250:50~3000mm | B—Screw Type
B:Ball Screw C:Roller Screw |
R—Anti-rotation
T:Without | 05—Screw Lead TJER190:10,20mm TJER220:10,20mm TJER250:10,20mm | A—Motor Mounting Type B:Parallel |
M—Cylinder Mounting Type
M1:Double side mount M2:Side turnnion mount M3:Front flange mount M4:Rear flange mount M5:Rear clevis mount M6:Rear shaft mount MX:Customized
| C —Load Connection Type
C1:Male C2:Female C3:U-bolt C4:Ball head hinge CX:Customized | 20—Power
01:100W 02:200W 04:400W 08:750W 10:1000W 20:2000W 30:3000W |
05—Reduction Ratio
05:Five-to-one 10:Ten-to-one 20:Twenty-to-one | 2—Number Of Limit Switches
(Default is normally open NPN switch) | O/C—Limit Switches
O:Normally Open C:Normally Close
|
N/P—Sensing Type
N:NPN P:PNP |
Mark:
1. In order to ensure the effective stroke, two ends need to be reserved 5mm space.
2. The sensor couldn’t be mounted on the same side of the motor when the motor is parallel mounted.
2. Electrical Servo Cylinder Drive Torque And Power Selection Table
| Motor connection | Parallel (belt drive) | ||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 5 | 10 | 20 | ||||||||||||||
| Screw Lead | [mm] | 10 | |||||||||||||||||
| Motor Power | [KW] | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | |||
| Motor Rated Torque | [N.M] | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | |||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | |||
| Cylinder Rated Force | [KN] | 14.56 | 19.84 | 38.77 | 21.84 | 29.76 | 58.16 | 72.8 | 99.2 | 193.85 | 145.6 | 198.4 | 350 | 291.2 | 350 | 350 | |||
| Cylinder Max. Force | [KN] | 350 | |||||||||||||||||
| Cylinder Speed | [mm/s] | 0-150 | 0-150 | 0-65 | 0-50 | 0-30 | 0-25 | 0-15 | |||||||||||
| Motor connection | Linear (coupling direct drive) | |||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 5 | 10 | 20 | |||||||||||||||
| Screw Lead | [mm] | 10 | ||||||||||||||||||
| Motor Power | [KW] | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | |||||||
| Motor Rated Torque | [N.M] | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | |||||||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | |||||||
| Cylinder Rated Force | [KN] | 14.56 | 19.84 | 38.77 | 72.8 | 99.2 | 193.85 | 145.6 | 198.4 | 350 | 291.2 | 350 | 350 | |||||||
| Cylinder Max. Force | [KN] | 350 | ||||||||||||||||||
| Cylinder Speed | [mm/s] | 0-150 | 0-65 | 0-50 | 0-30 | 0-25 | 0-15 | |||||||||||||
| Motor connection | Parallel (belt drive) | |||||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 5 | 10 | 20 | |||||||||||||||||
| Screw Lead | [mm] | 20 | ||||||||||||||||||||
| Motor Power | [KW] | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | ||||||
| Motor Rated Torque | [N.M] | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | ||||||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | ||||||
| Cylinder Rated Force | [KN] | 7.27 | 9.92 | 19.38 | 10.01 | 14.87 | 29.07 | 36.36 | 49.59 | 96.9 | 72.72 | 99.18 | 193.8 | 145.4 | 198.4 | 350 | ||||||
| Cylinder Max. Force | [KN] | 350 | ||||||||||||||||||||
| Cylinder Speed | [mm/s] | 0-150 | 0-150 | 0-130 | 0-100 | 0-65 | 0-50 | 0-30 | 0-25 | |||||||||||||
| Motor connection | Linear (coupling direct drive) | |||||||||||||||||||
| Reduction ratio | 1 | 1.5 | 5 | 10 | 20 | |||||||||||||||
| Screw Lead | [mm] | 20 | ||||||||||||||||||
| Motor Power | [KW] | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | 5.5 | 7.5 | 11 | ||||
| Motor Rated Torque | [N.M] | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | 26.25 | 35.81 | 70 | ||||
| Motor Rated Speed | [r/min] | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | 2000 | 2000 | 1500 | ||||
| Cylinder Rated Force | [KN] | 7.27 | 9.92 | 19.38 | 10.01 | 14.87 | 29.07 | 36.36 | 49.59 | 96.9 | 72.72 | 99.18 | 193.8 | 145.4 | 198.4 | 350 | ||||
| Cylinder Max. Force | [KN] | 350 | ||||||||||||||||||
| Cylinder Speed | [mm/s] | 0-150 | 0-150 | 0-130 | 0-100 | 0-65 | 0-50 | 0-30 | 0-25 | |||||||||||
3. Applications
(1) Military equipment:radar, missile erector, armored
vehicle swing platform, special equipment and other warships and
aircraft hatch,opening, seat height adjustment, weapon tracking
system,actuator,experimental lifting support, tank artillery high
and low direction action adjustment, The push of rocket fuel, the
opening of furnace door, etc.
(2) Special equipment:industrial automation production line,
assembly line, logistics transmission, lifting platform, offset
control, valve control, coordinate manipulator, mechanical
equipment CT Kama knife, food and medicine industry, CNC machine
tools, industry packaging machine, Automotive electronic press,
textile equipment winding machine indexing, die position control,
clamping, drilling, positioning.
(3) Experimental Equipment: Simulation platform, test bed, wave
machine, testing equipment etc.
This type is especially suitable for :
servo pressing, motor assembly production line and you can also
purchase our servo pressing software together.
4. Why choose us?
1. Compact structure and small dimension.
2. High rigidity, low inertness and fast response.
3. High reliability and long operating life.
4. Energy saving&less noise.
5. Convenient assembly and use,simple maintenance.
6. One years of quality assurance, life - long maintenance service.
5. FAQ
Q:How much is your minimum order quantity?
A:1 piece.We have confidence that you are satisfied with our production.
Q:What's the price of the product?
A:The price is based on the size,specification and accessories.You can provide us the detailed information and specific requires then we will make the model selection for you and give you the formal offer.
Q:Which conturies and regions do your products export to?
A:Germany,Spain,Italy,Brazil,Mexico,Japan,Iran,India and etc.Mainly used for warp knitting machine and preesing machine.By the way,many customers replace hydraulic cylinders and air cyinders with our servo electric cylinders.
Q:Could you offer us free samples?
A:Sorry we can't.But don't worry,we can sign trial contract with you.If you are satisfied with the production you can ask for a refund.
Q: I have bought your cylinder 5 years ago, but now the accuracy is
not so good, how I can deal with it?
A: First of all, thank you very much for your trust and using our
cylinder, I think the main reason is the screw inside, after about
8000 working hours, you’d better replace it with a new screw to
ensure the accuracy.
The reference formula:
L10=(Ca/Fm)3×L
★ L10: The life of the electric cylinder,unit: Km
★ Fm: Average load of electric cylinder,unit: Kn
★ Ca: Screw nut basic dynamic load, unit: Kn
(can be detected by screw samples)
★ L: Screw lead,unit: mm
