|
[China]
Trade Verify
Address: Leyu town,Zhangjiagang City,Jiangsu Province,China
Contact name:Jim Gu
ZHANGJIAGANG CITY PEONY MACHINERY CO.,LTD |
|
Verified Suppliers
|
|
|
4000LPH Ship Oil Separator Modular System , High Speed Disc Stack Centrifuges
Description:
1.Model PDSD4000 separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.
2.The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.
3.The machine adopts automatic control, and has the advantages such as high efficiency, low oil consumption, convenient operation and economic maintenance cost. The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.
4.The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with low vibration, safety and security.
5.The design, product and acceptance are conformed to the standard
of GB/T5745 Marine Disc Separator.
Advantages:
1. Automatic piston type slag removal
2. Modular design
3. Automatic operation
Discharging type | Full discharging | |
Max capacity | L/h | 4000 |
1800-2000(180cst/50°C) | ||
Motor power | kw | 5.5(380V/50Hz/3P) |
Dimension | L × W × H (mm) | 1095 × 792 × 1247 |
Condition for mineral oil separation and actual capacity (refer to the chart)
Oil types | Fuel oil | Lubrication oil | Steam turbine oil | |||||||
Fuel oil | Heavy fuel oil | SAE30, 40 | Detergence oil | |||||||
Kinematical viscosity (mm²/s) | 1.9- 5.5 | 5.5- 24 | 120 | 180 | 380 | 100-120 | 61.2-74.8 | |||
40℃ | 50℃ | 40℃ | 40℃ | |||||||
Density (kg/m³)(20℃) | < 900 | 900-991 | 880-900 | < 900 | ||||||
Separating temperature (℃) | Normal temperature, 40-60 best | 90-98 | 80-95 | |||||||
Recommended capacity (L/h) | 4500 | 4000 | 2200- 2400 | 1800- 2000 | 1400- 1600 | 2000- 2400 | 1000-1200 | 3200-3400 | ||
If you have special requirement, please connect with us. | ||||||||||
Technical analysis:
Peony's Disc separator technology comparison with foreign companies
No. | Technical Content | Peony’s Marine Disc Separator | Oversea famous brand Disc Separator |
1 | The performance index of material | Viscidity(380 ～700 cSt/50℃) density(1010kg/m3) | Viscidity(380 ～700 cSt/50℃) density(1010kg/m3) |
2 | Capacity | 1500～8000L/h | 1500～8000L/h |
3 | System integration | Standardized, modular | Standardized, modular |
4 | The transmission system | High-speed flat belt + friction coupling | High-speed flat belt + friction coupling |
5 | Drum structure | "No gravity ring" + full hydraulic discharge mode | "No gravity ring" + full hydraulic discharge mode |
6 |
Full automatic control level | Fulfill online detection, real-time monitoring, intelligent feedback control Meet the requirements of ship with unmanned engine room | Fulfill online detection, real-time monitoring, intelligent feedback control Meet the requirements of ship with unmanned engine room |
7 | Moisture sensors |
capacitance(the same as Westfalia)
| capacitance |
8 | Design of calculation method | Finite element analysis (Structure design and the internal flow field analysis of drum) | Finite element analysis (Structure design and the internal flow field analysis of drum) |
9 | Drum material | DSS, Special stainless steel | DSS, Special stainless steel |
10
| Belt
| Super seamless ring belt
| Super seamless ring belt
|
More pictures
Principle and structure
Disc separator is vertical centrifuge. The drum is installed on the upper side of the vertical shaft. Driven by the motor, it will rotate at a high speed through the gearing. Inside the drum there is a group of dish parts overlaying each other – disc. There is very small gap between the disc. Suspension (or emulsion) is fed into the drum through the inlet in the middle of the drum. When the suspension (or emulsion) flows through the gap between the disc, under the action of the centrifuge, the solid particles (or droplets) go down to the disc in the formation of sediment (or liquid layer). Along the disc surface, the sediment slides out of the disc and accumulates at the part with the largest diameter inside the drum. After the separation, the liquid is discharge out of the drum from the drain outlet. The role of the disc is to reduce the sediment distance of solid particles (or droplets) and enlarge the sediment area of the drum. With the disc inside the drum, the capacity of the separator is improved greatly. The solid gathering inside the drum is manually removed by taking apart the drum after power off, or discharges from the drum through the slag-off part with the separator power on.
