Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Force sensor torque transducer |
|
|
Features
Dimensions
Specifications
| Rated capacity | 3kg 6kg 10kg 15kg 20kg 30kg 40kg |
| Rated output | 2.0±10%mV/V |
| Excitation | 3-15V |
| Zero balance | ±5% R.O. |
| Nonlinearity | ±0.02% R.O. |
| Hysteresis | ±0.02% R.O. |
| Nonrepeatability | ±0.015% R.O. |
| Creep(30min) | ±0.03% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./10oC |
| Temperature shift span | ±0.02% R.O./10oC |
| Input resistance | 1130±20 ohms |
| Output resistance | 1000±3 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP65 |
| Material of element | Aluminum alloy |
| Cable | Ø4*400mm(Longer cable available) |
| Wiring code | Red--Exc+ Black--Exc- |
Load cell 30kg 20kg 15kg 10kg 6kg 3kg
A load cell sensor is a transducer that converts mechanical force
into electrical signal which is proportional to the load being
applied.The measured load or force causes deformation of the
measuring element,the bonded strain gauge deforms accordingly which
will cause the resistance change of the wheatstone bridge,under
constant power supply,the output signal between Sig+ and Sig- will
change proportionally,thus the load can be measured by
measuring the output signal from the load cell.
