Home Companies Force sensor torque transducer

Compression load cell 100KN 50KN 30KN 20KN 10KN compression force measurement

Active Member

Contact Us


Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000

Contact name:Tarik Lu

Force sensor torque transducer

Compression load cell 100KN 50KN 30KN 20KN 10KN compression force measurement

Country/Region china
City & Province shenzhen guangdong
Categories Sensors

Product Details

Compression load cell compression force measurement


  • Stainless steel construction
  • Button type load cell,compact size
  • Mounting holes on the bottom,easy to install
  • Strain gauge technology,analog output
  • Compression force measurement for limited space
  • Widely used for force overload protection,pressure distribution measurement,auto equipment,production line,press machine.etc.

Dimensions(unit in "mm“)


Rated capacity100KN 50KN 30KN 20KN 10KN 5KN 2KN 1KN
Rated output 1.3-1.8mV/V
Excitation 5-15V
Zero balance ±2% of R.O.
Nonlinearity ±0.3% of R.O.(>2t,±0.5% of R.O.)
Hysteresis ±0.3% of R.O.(>2t,±0.5% of R.O.)
Nonrepeatability ±0.1% of R.O.
Creep(30min) ±0.1% of R.O.
Safe overload 150% of F.S.
Ultimate overload 200% of F.S.
Compensated temperature -10...+40oC
Operating temperature -20...+60oC
Temperature shift zero ±0.01% R.O./oC
Temperature shift span ±0.01% R.O./oC
Input resistance 385±30 ohms
Output resistance 350±10 ohms
Insulation resistance >5000M ohms
Ingress protection IP66
Material of element Stainless steel
Cable Ø4*1500mm(Longer cable available)
Wiring code

 Red--Exc+   Black--Exc-
 Green--Sig+ White--Sig-


A compression load cell is a transducer that converts compression force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.

Compression load cell FC50 outputs millivolt signal ranging 0-20mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get 0-5V, 0-10V or 4-20mA signal which is proportional to applied force.The amplified output is can be easily processed by PLCs and data acquisition software.

The applied force can be displayed through a force indicator,force meter FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal.

Hot Products

Rotary torque transducer Dynamic torque sensors Features Strain gauge technology,analog output Slip...
Rotating torque sensor rotary torque transducer Features CE certified Stainless steel measure ...
Dynamic torque transducer|Rotary torque sensors Features Strain gauge technology,slip-ring torque ...
Rotating torque load cell dynamic torque transducer Features CE certified Stainless steel measure ...
Rotary torque sensor tightening torque measurement Features Strain gauge technology,analog output ...
Contactless rotary torque sensor measuring motor torque Features Alloy steel construction Shaft to ...