Thermoplastic Powder Coating Gas Burner , Stand Up Industrial Oven
Burner
Matters needing attention in coating production line
1 When the dip coating operation is performed on the coating
production line, sometimes the paint film on the lower part of the
coating has a thickness difference, especially the accumulation of
hypertrophy at the lower edge of the coated object. In order to
improve the decorativeness of the coating, in small batches of dip
coating, use a brush to manually remove excess paint drops, or use
centrifugal force or electrostatic attraction equipment to remove
these paint drops.
2 When dip coating wooden parts on the coating production line, pay
attention to the time not to be too long, so as to prevent the wood
from inhaling excessive paint, causing slow drying and waste.
3 Strengthen the ventilation equipment to prevent the harm of
solvent vapor; pay attention to the arrangement of fire prevention
measures and regularly check the coating production line.
Sennisi burner is an excellent design, the production technology of
excellence
and the crystallization of excellent materials, strict inspection
procedures and
sophisticated experimental methods to ensure that each burner
shipped from
the factory has excellent quality
Model Table
item | Burner output | Width | Height | Thickness | Weight | Air consumption |
KW(KCAL/H) | mm | mm | mm | kg | m3 |
SBJ-300 | 190-465 | 630 | 400 | 480 | 32.2 | 3.8-9.3 |
SBJ-400 | 300-697 | 670 | 450 | 530 | 42.8 | 5.8-13.9 |
SBJ-600 | 486-1279 | 710 | 500 | 580 | 25.9 | 15.9-23.8 |
Sort | name |
1 | Combustion Combustion Fan |
2 | Wind pressure switch |
3 | Burner nozzle |
4 | Proportional butterfly valve |
5 | Gas ball valve |
6 | Photoelectric switch |
7 | Proportional motor |
8 | Control box |
9 | Pressure gauge |
10 | Fan filter |
11 | Gas pressure switch |
12 | Gas main safety valve |
13 | Ignition transformer |
14 | Mother Fire Solenoid Valve |
15 | Fire solenoid valve |
16 | Spherical needle valve |
17 | Ignition rod |
18 | Burning firebox |