Zhejiang In-way Precision Machinery Co., Ltd |
Verified Suppliers
|
|
DIN9834 / ISO9448 guide bushing, european standard, SO#50SP2 with
graphite
DIN 9834,DIN 9448 Bronze Collar Guide bush
Huge Stocks
Material: Bronze with solid lubricant, oilless lubricating
Type | Straight | Bushing Material | Graphite Impregnated Brass |
---|---|---|---|
I.D. d(mm) | 6 | O.D. D(mm) | 10 |
Overall Length L(mm) | 10 | Maximum Allowable PV Value Range(N/mm2•m/s) | 1.1~2.0 |
Maximum Allowable PV Value(N/mm2•m/s) | 1.65 | Maximum Allowable Load(N/mm2) | 29 |
Maximum Allowable Velocity(m/s) | 0.5 | Mounting Hole Fits | H7 |
Operating Temperature Range(℃) | -40~150 | Operating Temperature Range (No Lubrication) Min | -40 |
Advantage
1. Total Self-Lubricating:No oil or grease required
The self-lubricating features allow bearings to be used where
oiling is difficult, expensive to implement, and where grease/oil
cannot be used. Excellent lubrication is achieved even under high
loads at low speeds.
2. Excellent Wear Resistance:
Excellent wear resistance is achieved under severe working
conditions, such as heavy load, low velocity, reciprocating,
oscillating and intermittent motions where the formation of oil
film is difficult.
3. Low Coefficient of Friction: 0.04 to 0.2 typical:
Self-lubrication with specially embedded solid lubricants reduces
friction.
4. Wide Operating Temperature Ranges: -40 °C to +300 °C
Superior performance is exhibited under high and low temperature
conditions.
5. Corrosion and Chemical Resistance:
Performance is not affected by water and caustic chemicals.
6. Designed to Exceed Your Requirements:
High precision products with close tolerances.
7. Cost Competitive:
Maintenance, replacement, and end-item downtime cost reduced due to
the exceptional service life compared to similar self-lubricating
products.
Catalog No.(Type) d D1 L1 t r X(DIN 509)
9834-025 (11)
9834-032 (12)
9834-040 (13)
9834-050 (14)
9834-063 (15)
9834-080 (16)
9834-100 (17)
9834-125 (18)
9834-160 (20)