Active Member
|
[China]
Address: Taixiang building,No.918,East jiefang road, Liangxi district, Wuxi city,Jiangsu,China.
Contact name:zhang
YGB Bearing Co.,Ltd |
|
|
SKF Angular Contact Ball Bearing Double Row 3214A-2RS1TN9C3W33 For
Speed Reducer
Description :
| Model | 3214A |
| Bearing material | Stainless steel, Gcr15. carbon steel |
| Lead time | Stock or 15-30days |
| Clearance | C2,C0,C3,C4,C5 |
| Vibration Level | V1, V2, V3, V4 |
| Precision Rating | P0,P6,P5, |
| MOQ | No MOQ |
| Port | Shanghai |
| Grease | Mobil polyrex EM,Kyodo Yushi SRL |
| Payment terms | T/T, L/C |
Photo:
Drawing:
Structural deformation type:
Double-row angular contact ball bearings are characterized by being
able to withstand both radial and axial loads, limiting the axial
displacement of both sides of the shaft. Compared with the two-way
thrust ball bearing, this kind of bearing has a higher limit speed,
a contact angle of 32 degrees, good rigidity and can withstand a
large overturning torque. It is widely used in the front wheel hub
of cars (some models also use the same size double-row tapered
roller bearing).
There are four kinds of structural deformations of double-row
angular contact ball bearings:
Type A: a standard design for bearings with outer diameter less
than or equal to 90mm. There is no load gap, so it can bear an
equal axial load in both directions. Lightweight glass fiber
reinforced nylon 66 retainer, bearing temperature rise is very
small.
Type A: a standard design for bearings with an outer diameter
greater than 90mm.Ball notched on one side and equipped with z
plate press cage or brass solid cage.
Type E: it is a reinforced structure, with a ball gap on one side,
which can hold more steel balls, so the bearing capacity is higher.
Double row angular contact ball bearings of type A design and type
E design can have dust cover (non-contact) or sealing ring
(contact) on both sides. The inside of the sealed bearing is filled
with anti-rust lithium base grease and the operating temperature is
generally between -30 ° c and 110 ° c. There is no need for
lubrication during use and no heating before installation.
When installing double-row angular contact ball bearings, it should
be noted that although the bearings can bear two-way axial load, if
there is a ball loading gap on one side, it should be noted that
the main axial load should not pass through the groove on the side
with a gap.
Payment
1: T/T: 30% as deposit and 70% balance after getting a copy of B/L.
2: L/C (cannot for branded bearings.)
3: Discuss together between buyer and supplier.
Contact us:
YGB Bearing Co., Ltd
Add: A-2208,3rd floor,421 weiqing west road, Jinshan district,
Shanghai, China.
Tel: +86-510-85850066
Fax:+86-510-85850066
Whatsapp:+86-15896477526
Skype:ygbbearing
Website:www.ygbbearing.com
Dear friend, any questions please feel free to contact us, let's
learn and grow together in bearing worlds!
