|
[China]
Trade Verify
Address: No.265 of zhongshan road ,shijiazhuang city ,heibei province ,china 050000
Contact name:zhijing.gao
Huihao Hardware Mesh Product Limited |
|
Verified Suppliers
|
|
|
Cup Head Pins For Duro-dyne Auto Feed Resistance Welding Equipment
>> >> >> Introduction To The Cup Head Pins For Duro-dyne Auto Feed resistance Welding Equipment
Cup head weld pins are used to fasten insulation materials onto duct work or other steel surfaces.
The cup head pins are welded to the metal after they pierce through the insulation and make contact
with the surface. A capacity discharge stud welding machine (CD) is necessary foruse with these pins.
| Drawing | D | WD | Min L |
 | 0.135" | 1" | 0.5" |
Pin Material: Low carbon steel or stainless steel
Pin Surface Finish: galvanized is standard, copper plating is available upon special
request.
Base Material: Low carbon steel or stainless steel
Base Surface Finish: galvanized is standard
Base Edge: Base edge is beveled to prevent cutting of insulation material. Flat washer style also standard.
Both styles auto-feed quality.
Application: This cup head pin is for use with Duro-Dyne auto feed resistance welding equipment.
>> >> >> Detailed Image Of The Cup Head Pins
>> >> >> Application Of The Cup Head Weld Pins
>> >> >> Related Products
1. Cup Head Weld Pins With Or Without FRK paper washers
| Material | Cup Head Dia | Pin Dia | Length |
| Mild Steel | 1-3/16" | 14ga 12ga 3mm 10ga | 3/8" - 12" |
| Stainless Steel | 1-3/16" | 14ga 12ga 3mm 10ga | 3/8" - 12" |
2. Cup Head Duct Pins
| Material | Cup Head Dia | Pin Dia | Length | Finish |
| Mild Steel | 1-1/2" | 12ga, 10ga | 1/2" - 6" | galvanized steel or copper coated |
| Stainless Steel | 1-1/2" | 12ga, 10ga | 1/2" - 6" | polished |
>> >> >> Package
1. 500pcs per bag, 10 bags per carton, 72 cartons
2. 1000pcs per carton, 48 cartons per pallet.
3. to be your requirements
