Home Companies Huihao Hardware Mesh Product Limited

114mm Length Stick On Insulation Pins For Air Conditioning Hvac Systems

Contact Us

[China]

Trade Verify

Address: No.265 of zhongshan road ,shijiazhuang city ,heibei province ,china 050000

Contact name:zhijing.gao

Huihao Hardware Mesh Product Limited

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

114mm Length Stick On Insulation Pins For Air Conditioning Hvac Systems

Country/Region	china
City & Province	shijiazhuang hebei

Product Details

114mm Length Stick On Insulation Pins Used For Air Conditioning HVAC Systems

Quick Details Of The 114mm Stick On Insulation Pins:

Stick On Insulation Pins are used widely in industries like Heating, Ventilation and

Air Conditioning (HVAC) Systems.

They are used in external thermal insulation and internal acoustic liner onto the duct surface.

The pin has a sticker backing to make fixing easier.

They also have a unique easy- peel adhesive backing design so that there isn’t any fumbling

with the release paper.

Brand	HUIHAO CUSTOM
Name	114mm Length Stick On Insulation Pins
Material	Galvanized Steel
Base size	50x50mm
Base thickness	0.4-0.5mm
Adhesive thickness	1.0mm
Pin diameter	2.7mm
Pin length	114mm
Advantages	1. The pins are riveted on the base of the stick on insulation pins, it's very strong. 2. The self adhesive tape on the base botom of the stick on insulation pins is very sticky. 3. The self locking washers are very hard, it could lock the stick on insulation pins very firmly.

Specifications Of The Stick On Insulation Pins:

Composition:

Pin: The pin is made from 12 gauge annealed low carbon steel.

(Available in copper coated, aluminum, or stainless steel.)

Base: 2" x 2" (50x50mm) square plate made from glavanized steel.

Adhesive foam: 1mm thick double sided foam with release paper.

Temperature range:

0ºF to 140ºF

Load limit:

2lbs per hanger

Available sizes:

Lengths from 3/4" up to 10" (19mm-250mm)

Common length:

1-5/8": commonly used for 1-1/2" .75# fiberglass duct wrap

2-1/2": used for fiberglass duct wrap over 1-1/2" thick

Restrictions:

1. Do not use on metal buildings or ceilings where temperatures due to sunlight exposure

may exceed 140ºF

2. Do not use on cement, wood, or painted surfaces

3. Must be used on clean dust-free surfaces.

4. Do not exceed spacing of 12" between hangers and 2lb load per hanger.

Application Of The Stick On Insulation Pins

1. Stick On Insulation Pins can only be stuck on clean, dry and smooth surface.
2. Remove any duct, loose paint, oil etc. Cleaning the surface is recommended.
3. Peel off the backing paper.
4. Place the stick on insulation pins in the required position.

5. Press the base against the cleaning surface.

6. Impale the insulation over the point of the stick on insulation pins.

7. Secure the insulation with the self locking washers

8. Bend or remove excess pins

Huihao Hardware Mesh Product Limited.

1. We choose the best quality materials for making insulation fasteners
2. We do copper plating, zinc coated and phosphating pretreatment for the raw material
3. We purchase the multi-station cold forging machine to ensure the better mechanical property of shear connector to match the standard (BS EN ISO13918:2008, AWS D1.1, etc.), or as per customer's special requirement.
4. We use the automatic riveting machine to install .
5. After rust prevention, HUIHAO insulation fasteners can suitable for long time ship on the sea.
6. Short delivery time because of our reasonable production flow management.