Galvanized Steel Self Stick Insulation Pins with 2'' Square Base For Air Duct

Self Stick Insulation Pins is a insulation hanger, it is fabricated by a 2" X 2" metal base with a tape on the back riveted with a pin,

we also call it as self-adhesive pin or peel&press pin, it works with a self locking washer to fasten the insulation, different from

the perforated base pins, they are used for sticking onto new or clean sheet metal of insulation construction.

The base thickeness could be customized.

The length of the Self Adhesive Insulation Pins also could be customized .

How to install the Self Stick Insulation Pins

1, clean the surface
2,Peel off backing
3, stick pin in place
4 ,pressure the pin
5, wait 15-20 minutes
6, Install insulation and secure with self locking washer

WIPE SURFACE CLEAN.Anchor should be applied to a clean, dry non-porous surface

PEEL OFF RELEASE BACKING.NOTE: Double faced foam tape has a one-year active shelf life

STICK ANCHOR IN PLACE.Select location before contact with surface.Press firmly

APPLY FIRM PRESSURE.20 pounds of pressure should be applied all around the base of the anchor

ALLOW TO STAND 15-20 MINUTES.This will permit better adhesion to take place

Advantages of the Self Stick Insulation Pins

1. Environmentally-friendly

2. Light, dust free, fire retardant and easy to install

3. Heat reflection, heat insulation, sound insulation, counter radiation, counter vibration and shielding

4. During Summer: moisture barrier, sun protection, waterproof, energy saving consumed by cool air conditioning

5. During Winter: heat protection, remarkable energy saving consumed by warm air conditioning

Self locking washers is available with the pins .

Packaging methods of the Self Stick Insulation Pins

Cartons and pallets；500 pcs in one carton in common,also could be packed according to the customer's requirement.