Home Companies Ain Technology (Shenzhen) Co., Ltd

Light Filter Function Security Alarm Device 4 Channel Active Ir Sensor Dual Beam

Active Member

Contact Us

[China]

Address: No. 301A, 3F, C6 Bldg, Hengfeng,No 739 Zhoushi Rd,Hezhou, Hangcheng, Bao'an, Shenzhen City, 518000 China

Contact name:Spring_zhang

Ain Technology (Shenzhen) Co., Ltd

Light Filter Function Security Alarm Device 4 Channel Active Ir Sensor Dual Beam

Country/Region	china
City & Province	shenzhen guangdong

Product Details

Outdoor Dual-beam Four-channel Active Infrared Detector

Active Ir Sensor Introduction

Item		Specification				Remark
Model		XA-031D	XA-061D	XA-081D	XA-101D
Detection Mode		Pulse Infrared
Range		30m	60m	80m	100m	Outdoor
Power Input		DC10 ~28V				Polar
Consumption Current		77mA Max.		85mA Max.		Transmitter and Receiver at DC 12V
Alignment Range		Vertical :±5degrees ,Horizontal :±90degrees				Transmitter and Receiver
Interruption Period		40msec/100msec/400msec/700msec				4 stage by DIP switch
Number of Channel		4channel				Interference Prevention
Relay Output Action	Alarm	When beam is shaded(2 seconds Min)
	Supply voltage drop alarm	When power supply voltage falls (2 seconds Min).
Relay Output		No voltage contact output Output Rating :DC30V,0.3A (Resistor Load ) Select the contact a or b through the switch				Output located on the receiver
alarm Alarm Action Low supply voltage alarm Indication Buzzer		Red LED is on when alarming, and red LED is off when guarding Red LED is off in the normal state, and red LED is on in the abnormal state Large sound ,small sound, and Mute is changed by received level.				Located on the receiver can not display when power off on/off by DIP switch ON/OFF by the switch
Voltage Level Optical Alignment Alignment LED		Insert the voltmeter's probe into the receiver monitor jacks , and adjust for the Max. voltage. Red LED Indicator ON, FLASH, and OFF is changed by received level.				Refer to the instruction to adjust. Located on the transmitter ON/OFF by the switch
Tamper Output	Condition Rating	N.C.open when receiver' cover is removed. No-voltage contact output, DC 30V, 0.3A (resistive load)				Output from tamper terminal that located on the receiver.
Power Indicator		Green LED ON when a transmitter is powered.				located on the transmitter ON/OFF by the switch.
Operating Environment		Temperature: -25℃ ~ + 55℃; humidity: Rh.95% Max.
Dimensions		234mm×77mm×83mm				Cover:Black ,PC resin Main Unit:Yellow,ABS resin
Weight		Transmitter::520g,Receiver:550g				Including mounting plate

Active Ir Sensor Features

Optical structure: unique Fresnel spherical lens with stronger optical focusing ;
LED window: action confirmation is more rapidly after setting; Internal fluorescent yellow body, facilitating the adjustment and calibration even if the light is dim and poor;
High-sensitivity calibrating articulation device ( installed on the light receptor), making the optical axis easy to adjusted and calibrated;
Four channel coding for beam frequency, effectively preventing the signal crosstalk problem;
New shell design and light filter function;
Internal microcomputer intelligent CPU chip, automatic sensitivity adjustment function makes action more accurate.
Ingress protection of IP65, all-round rubber seal ring, effectively protecting against rain, mist and insect.

Active Ir Sensor Advantages

1. The Active Infrared Beam Detectors utilize invisible Infrared barriers to detect the intrusion. It has long detection/guarding range, low-cost, high-quality, and installation-friendly features.

2. Our beam detectors adopt 4-channel frequency design to avoid IR interference between different beams, this can greatly reduce the false alarm rate to offer you accurate motion detection.

3. These photoelectric beam detectors have N.O. and N.C. alarm output, can work with difference systems through reliable wired connection. It's the ideal security detectors for your intrusion alarm system, access control system, IP surveillance system and home automation system.

30m Outdoor Photoelectric Beam Sensor