Active Member
|
[China]
Address: Room 811 Build 143, No. 1399 Husong Road, Shanghai, China
Contact name:Murphy
Shanghai Xunhui Environment Technology Co., Ltd. |
|
|
| Type: | Inline Ultrasonic Flow Meter | Display: | LCD |
|---|---|---|---|
| Transducer: | Inline / Clamp On / Insert | Accuracy: | +/- 1% |
| Communication: | 4-20 MA / OCT Pulse / Relay | Size: | DN50-700 |
| Temperature: | 90 C / 160 C | Pipe Material: | Weld Steel, Stainless Steel, Cast Iron, Copper / Brass, Cement Pipe, Aluminum |
Fixed Inline ultrasonic flowmeters by transit time multi-liquid velocity determine for slurry | effluent | sewage
General of ultrasonic flow meters
The UFM Ultrasonic flowmeters can determine the velocity of a fluid flowing in a pipe by sound waves. When it's in no flow conditions, an ultrasonic wave's frequencies are transmitted into a pipe and its reflections from the fluid are the same. When it's under flowing conditions, the frequency of the reflected wave is different due to the Doppler effect. When liquid media moves faster, the frequency shift increases linearly. The transmitter processes signals from the transmitted wave and its reflections to determine the flow rate.
The transit time type ultrasonic flowmeters can give and receive ultrasonic waves between the transducers in both the upstream and downstream in the pipe. While it's under no flow conditions, it takes the same time to travel upstream and downstream between the transducers. While it's under flowing conditions, the upstream wave will travel slower and take more time than the (faster) downstream wave. When the fluid moves faster, the difference between the upstream and downstream times increases. The transmitter processes upstream and downstream times to determine the flow rate.
Data sheet
Accuracy <1%
Flow rate 0 - 10m/s, bi-direction
Pipe diameter DN32 - DN6000 mm
Liquid temperature -30℃ - 160℃
Liquid type water, sea water, sewage, effluent, oil, alcohol, any single liquid that can
transmit ulstrasonic wave
Pipe material stainless steel, cast iron, copper, PVC, aluminum, fiber glass steel
Output one way 4-20mA, one way OCT pulse, one way replay
Input three way 4-20mA, PT1000 platinum resistor for heat measurement
Communication RS485, MODBUS
Data storage SD card
Power supply DC8-36V / AC85-264V
Protection IP65 (main body), IP68 (transducer)
Humidity <85% RH
Ambient temperature -20℃ - 60℃
Description:
The ultrasonic flowmeter is available with pipe type, clamp on and other options, it's designed for linear and bi-directional volumetric flow measurement of liquid. The measured flow datas can be output by standard analog or pulse or frequency. Through HMI user friendly operator interface, the unit can be set up for a wide range of applications. Next to actual volumetric flow measurement, the unit can be configured to perform flow totalization ( plus, minus, or sum). Measurement and output of the liquid sonic velocity can be configured too.
Optionally the unit can be set to perform one of the following additional functions:
Metering Diagram
Flow measurement Heat measurement
Reference chart
| Type | Model | Pipe dia (mm) | Temperature | Dimension (mm) |
| Clamp on | TS-2 | DN15-100 | -30-90℃ | 45x25x32 |
| TM-1 | DN50-700 | -30-90℃ | 64x39x44 | |
| TL-1 | DN300-6000 | -30-90℃ | 97x54x53 | |
| Clamp on (high temperature) | TS-2-HT | DN15-100 | -30-90℃ | 45x25x32 |
| TM-1-HT | DN50-700 | -30-90℃ | 64x39x44 | |
| TL-1-HT | DN300-6000 | -30-90℃ | 97x54x53 | |
| Insertion type | TC-1 | DN80-6000 | -30-90℃ | 190x80x55 |
| TC-2(lengthen) | DN80-6000 | -30-90℃ | 335x80x55 | |
| Pipe type | G3 (π type) | DN15-25 | -30-160℃ | |
| G2 | DN32/DN40 | -30-160℃ | ||
| G3 | DN50-6000 | -30-160℃ |
Optional temperature transducer
| Specification | Model | Dia | Temp. | Water cut | Accuracy |
| Clamp-on temp. transducer Pt100 | CT-1 | >DN50 | -40-160℃ | No | 100+ 0.8℃ |
| Insertion temp. Transducer Pt100 | TCT-1 | Yes | |||
| Insertion temp. Pt100 with pressure | PCT-1 | No | |||
| Insertion temp.Pt100 for small pipe D | SCT-1 | <DN50 | Yes |
Industries
Liquid type
Model Selection
| I | Model | ||||||||
| YF | Electromagnetic flowmeter | ||||||||
| TF | Turbine | ||||||||
| VF | Votex | ||||||||
| LX | Vane wheel | ||||||||
| T | Ultrasonic | ||||||||
| E/F display mode | E: compact/local display, F: remote display | ||||||||
| Pipe Dia | Type (mm) | ||||||||
| xxxx | 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 400, 500, 600, 800, 1000 | ||||||||
| Code | Accuracy | ||||||||
| 1 | + 0.5% FS | ||||||||
| 2 | + 1.0% FS | ||||||||
| 3 | + 0.2% FS | ||||||||
| Code | Type | ||||||||
| N | Converter: 12 / 24 VDC, pulse output | ||||||||
| A | Transmitter: 24VDC, 4-20mA outpt | ||||||||
| B | Intelligent, Lion battery, no local display | ||||||||
| G | Smart, local display, 4-20mA output | ||||||||
| C1 | Smart, local display, RS485 | ||||||||
| C2 | Smart, local display, HART | ||||||||
| Code | Type | ||||||||
| S | Carbon steel housing | ||||||||
| L | Stainless steel housing | ||||||||
| G | High pressure housing | ||||||||
| HL | 316L electrode | ||||||||
| HTi | Titanium electrode | ||||||||
| HTa | Tantlum electrode | ||||||||
| HC | Hastelloy-C electrode | ||||||||
| L1 | Liquid media | ||||||||
| L2 | Gas media | ||||||||
| P | Pressure compensation | ||||||||
| T | Temperature compensation | ||||||||
| PT | Pressure&Temp. Compensation | ||||||||
| F | PTFE liner | ||||||||
| X | Rubber liner | ||||||||
Sample: IYF-E-0100-1-C1-S-HL-L1-F, Magmeter, local display, Dia: 100mm, + 0.5%FS, carbon steel housing, smart, 4-20mA outpt, RS485, 316L electrode, liquid media meter, PTFE liner | |||||||||
Competitive Advantage:
