Active Member
|
[China]
Address: Head Office - No.211-4F Baogang Road,Luohu District,Shenzhen,GuangDong China
Contact name:Lan
Shenzhen Seabreeze Smart Card Co., Ltd |
|
|
125KHz EM4100, TK4100, EM4001, TK4101, EM4102 Chip Proximity ID Card Reader, USB port, Access Control, Identification
Product synopsis
USB card reader to implement the card serial number directly
transmitted to the computer via USB ports and users in using the
load driver, have the power, insert the card machine computer USB
interface, card indicates a red light and green light flash, until
you hear the buzzer rang two lights show only after the red light,
can begin a credit card, credit card after the card number is
displayed in the location of the cursor. Use the management
software to manage card number, produce many functions. This card
reader can read, can't write.
Classification: USB no drive, back 8 Numbers; USB no drive, front
10 Numbers.
If used for access control reader, card number format can optional 8H10D, 6H10D, 6H8D, 2H3D4H5D, 8H, 6H, 4H5D4H5D, optional rid of leading zeros, with enter key, can also be customized, default format 8H10D, with enter key.
ODM and OEM products according to customer's demand.
| Item | Parameters |
| Support system | USB keyboard systems support |
| Operating frequency | 125KHz |
| Fully support | uem4100 compatible format ID card (64 bits, Manchester code) |
| Read card Type | EM4100, TK4100, EM4001, TK4101, EM4102 or compatible chip |
| Work mode | Read only |
| Communication speed | 106Kbit/s |
| Serial baud rate | 9600Kbit/s |
| Power | DC 5V(±5%) |
| Work current | <100ma |
| Interface | USB |
| Expansion I/O interface | no |
| Status indication | 2-color LED indication, power red, reader green |
| Read Time | <100ms |
| Induction distance | 1~10cm |
| Operating temperature | -10℃~+70℃ |
| Storage temperature | -20℃~+80℃ |
| Relative humidity | 0~95% |
| Size | 110×80×26mm or 105×70×12mm |
| Color | Black |
Matters needing attention
There is a switch at the bottom of the card reader, you can adjust
the output 8 digits numbers.
Card reader is installed in the location of the convenient
operation, avoid close to the monitor, because the monitor
radiation may interfere with the normal work of the card reader.
Avoid close to a large area of metal objects, otherwise will
shorten card read distance, even don't read the card.
Card reader and computer communication between the cable length
should be less than 15 meters.
If there are no reader: the interface is plugged in; Whether it is
compatible with RFID card; RF card is bad ; if another RF card
reader is within range.
Transfer data error: whether it is strong electromagnetic
interference environment; communication cable between the reader
and the computer is too long.
