MF1 chip Card Block Encrypt Read/Write Module,ISO14443 TypeA
This module series carries has on the complex ISO14443 TypeA
protocol as well as the read-write card operation the
encapsulation, all the card read and write operations into several
simple instructions. Users don't need to understand complex
ISO14443 TypeA protocol,only need to know the use of card
structure, can be operated by simple instructions to read the
module, the complicated operation process all by the module to the
internal MCU to complete.
The products are widely used in non-contact smart water,
electricity, gas meter, electronic induction door lock,
transportation IC card read and write device, desktop card machine,
access control attendance, reading and writing device, auto
electronic induction lock, office/mall/bath center locker safety
control, various anti-counterfeiting system and production process
control.
Product features
Module is simple and easy to use, cost-effective;
Using high integration chip card reader;
Support MF1 IC S50/S70, FM1208 and compatible series of contactless
smart card;
Read/write distance long (according to the application of up to
50-80mm);
According to the need, can choose SPI, I2C, UART, RS232 and RS485
or Wiegand interface to connect with any MCU;
When using UART interface, with automatic baud rate detection
function, when with 232 level transformation can be directly
connected to the computer;
Choose 5V power supply, low power consumption;
With the control line and controllable buzzer signal output, can
choose onboard LED and buzzer;
Can read and write module block in EEPROM, with password loading
function;
Support card automatic detection function, without PC frequently
send card search instructions;
Provide C51 function library for secondary development;
Small size (antenna integration module 30×80×7mm).
Main technical parametersOperating frequency | 13.56MHz |
Support card | MF1 IC S50/S70, FM1208 and its compatible smart card |
Support Protocol | ISO 14443 TypeA |
Read range | 30-80mm (different depending on antenna, antenna integration reader
distance of about 6.5cm) |
Card transfer rate | 848kbit/s |
Interface | UART,I2C,RS232,Wiegand,RS485,custom SPI |
Power Supply | +5V for antenna integration |
Average current | 70mA/DC5V |
Production Process | use of surface mount technology |
Storage temperature | -40℃~+85℃ |
Operating temperature | -30℃~+70℃ |
Size | Split 30×80×7mm |
Antenna integration 30×50×7mm 30×34.35×2.5mm |
Pin spacing | 2.0mm |
Weight | 20g |