Home Companies Shenzhen Anges Machinery Co., Ltd

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

Contact Us

[China]

Trade Verify

Address: Tianshenghu Village Group, Luoma Village QingxiTown,Dongguan

Contact name:Sam

Shenzhen Anges Machinery Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

Country/Region	china
City & Province	dongguan

Product Details

60tons cooling tower technical parameters

Model		STG-60
Basic parameter	Type	Counter current circular cooling tower
	Nominal flow	46.8m³/h
	Inlet/outlet temperature	37℃／32℃
	Dry-bulb temperature	31.5℃
	Wet-bulb temperature	27℃
	Cooling capacity	234000kcal/h
	Noise (dB(A))	61dB(A)
	Power	380V／3P／50Hz
	Water quality	PH＝6 to 8
	N.W／G.W	240kg／1250kg
Fan	Fan type	Axial Flow
	Cooling air flow(m3/h)	28080m³/h
	Rotation speed(r/min)	710r/min
	Diameter	930 mm
	Quantity	4 pieces/set
	Electronic box	Water proof type
	Power	1.1kw
	Start-up mode	Direct start
Size	Height × diameter(H×φ)	2700×1980mm
	Inlet pipe caliber	100mm
	Outlet pipe caliber	100mm
	Full outlet/drain off pipe caliber	25mm／25mm
	water supply pipe caliber	20mm
Material	Sprinkler	P.V.C-U
	Casing	Fiberglass
	Water basin
	Fan	A.B.S.
	Electronic box	Water proof type
	In -fill	P.V.C.
	Shelf	Hot-dip galvanized steel

WORKING PRINCIPLE

A cooling tower is designed to remove heat from a building or
facility by spraying water down through the tower to exchange heat
into the inside of the building. Air comes in from the sides of the
tower and passes through the falling water.
A cooling tower is a device that rejects waste heat to the
atmosphere through the cooling of a coolant stream, usually a water
stream to a lower temperature.
Cooling towers may either use the evaporation of water to remove
process heat and cool the working fluid to near the wet-bulb air
temperature or, in the case of dry cooling towers, rely solely on
air to cool the working fluid to near the dry-bulb air temperature
using radiators.

Advantages

Tower body temperature weight: reduce the design requirements for
the foundation and installation costs.
The cooling water volume of the tower can be adjusted: for a given
type of cold water tower, with working water pressure change (that
is, flow change) in and out of the water temperature difference is
generally unchanged, so you can increase the water supply pressure
method to improve the cooling water volume of the tower (within the
scope of the spray device), but also can change the nozzle aperture
method to adjust the tower water volume and temperature drop.
No plugging, no maintenance, stable and reliable operation. A
series of phenomena that affect the performance of the tower and
process system equipment such as the plugging of the packing column
due to the impurities in the circulating water, the aging of the
packing, the deformation, the brittle-cracking, the plugging and
flushing of the sprinkler head, the plugging of the packing
brittle-chip in the pipeline, the pump and the heat exchanger are
completely eliminated. It completely eliminates the trouble of
frequent cleaning, replacement of filler and spray nozzle
Main Features
Small floating water rate: the spray device is evenly distributed
in the tower, and the outlet area is about twice as large as that
of the traditional power tower, so the wind speed is small. At the
same time, the top of the tower is installed with excellent
performance of the water collection device, which minimizes the
amount of floating water, and eliminates a lot of water refill.
​ Good cooling effect: the hot water in the tower exchanges heat
with the incoming air under the condition of mist. Due to the small
wind resistance in the tower and the reasonable design of air duct
and wind blade, the ratio of air to water is improved.
Common applications include cooling the circulating water used in
oil refineries, petrochemical and other chemical plants, thermal
power stations, nuclear power stations and HVAC systems for cooling
buildings. The classification is based on the type of air induction into the
tower: the main types of cooling towers are natural draft and
induced draft cooling towers.

Hot Products

Hvac 60HP Industrial Chiller Integrated System 12 Months Warranty

Hvac 60HP Industrial Chiller Integrated System 12 Months Warranty 60HP Integrated Screw Type Water ...

220V 380V 415V Industrial Chiller Integrated System Screw Type、

220V 380V 415V Industrial Chiller Integrated System Screw Type 40HP Integrated Screw Type Water ...

85HP Industrial Chiller Integrated System Semi Hermetic Screw Type

85HP Industrial Chiller Integrated System Semi Hermetic Screw Type 85HP Integrated Screw Type Water ...

160HP Integrated Water Cooled Screw Type Chiller R22 Refrigerant、

160HP Integrated Water Cooled Screw Type Chiller R22 Refrigerant 160ton Screw Chiller 160ton Water ...

50HP Integrated Water Cooled Chiller System Shell and Tube Package Unit

50HP Integrated Water Cooled Chiller System Shell And Tube Package Unit 50HP Integrated Screw Type ...

Integrated Screw Type 75HP Water Cooled Chiller easy to operate

Integrated Screw Type 75HP Water Cooled Chiller Easy To Operate 75HP Integrated Screw Type Water ...

Related Products

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

Contact Us

Shenzhen Anges Machinery Co., Ltd

60 Ton Cooling Towers 380V 3 Phase 50Hz Chiller Tower

Product Details

WORKING PRINCIPLE

A cooling tower is designed to remove heat from a building or facility by spraying water down through the tower to exchange heat into the inside of the building. Air comes in from the sides of the tower and passes through the falling water.

A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream to a lower temperature.

Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature using radiators.

Advantages

Tower body temperature weight: reduce the design requirements for the foundation and installation costs.

Main Features

​ Good cooling effect: the hot water in the tower exchanges heat with the incoming air under the condition of mist. Due to the small wind resistance in the tower and the reasonable design of air duct and wind blade, the ratio of air to water is improved.

Hot Products

Hvac 60HP Industrial Chiller Integrated System 12 Months Warranty

220V 380V 415V Industrial Chiller Integrated System Screw Type、

85HP Industrial Chiller Integrated System Semi Hermetic Screw Type

160HP Integrated Water Cooled Screw Type Chiller R22 Refrigerant、

50HP Integrated Water Cooled Chiller System Shell and Tube Package Unit

Integrated Screw Type 75HP Water Cooled Chiller easy to operate

Good cooling effect: the hot water in the tower exchanges heat with the incoming air under the condition of mist. Due to the small wind resistance in the tower and the reasonable design of air duct and wind blade, the ratio of air to water is improved.