|
[China]
Trade Verify
Address: Tianshenghu Village Group, Luoma Village QingxiTown,Dongguan
Contact name:Sam
Shenzhen Anges Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
170HP Air Cooled Screw Chiller Industrial Process Water Chillers plastic injection mold temperature controller
Injection molding machine chiller used in plastic processing machinery molding mold cooling, can greatly improve the surface finish of plastic products, reduce the surface marks and internal stress of plastic products, so that the product does not shrink, do not deformation, easy to release plastic products, accelerate product styling, thus greatly improving the production efficiency of plastic forming machine.
Air Cooled Process Chiller Specification
Model Parameter | AGS-170ADH | |
| nominal cooling capacity | kcal/h | 477988 |
| kw | 555.8 | |
| input power | kw | 181 |
| Max. Running current | A | 411.6 |
| power supply | 3PH~380V/50HZ | |
| refrigerant | type | R22 |
| refrigerating circuit | 1 | |
| type of control | expansion valve | |
| compressor | type | semi-hermetic screw |
| quantity | 1 | |
| Power | 76.8×2 | |
| start-up mode | Y-△ | |
| capacity control | 0-25-50-75-100 | |
| condenser | type | air cooled type finned copper tube |
| cooling air flow (m3/h) | 175000 | |
| power(kw) | 27 | |
| evaporator | type | shell and tube |
| quantity | 1 | |
| chilled fluid flow (m3/h) | 95.6 | |
| inlet and outlet pipe diameter (inch) | 6 | |
| safety protection | compressor over temperature, unit overload, high and low pressure, flow switch, phase sequence, phase-missing, anti-freezing | |
| net weight | kg | 4450 |
| Dimension | mm | 3150*4200*220 |
Benefit of industrial chiller applications
How to select the model of the chiller ?
In the production process, the injection molding machine needs to cool the mold to achieve rapid condensation of plastic, improve product quality, and improve production efficiency.
Here, the chiller is indispensable. Chiller used in injection molding machine, through extrusion, blow bottle, thermoplastic, hydraulic system four steps to achieve rapid condensation of plastic.
This shows the importance of the chiller to the injection molding machine. In the selection of chiller should pay attention to:
In mold cooling, the choice of ice water energy depends on its specific heat capacity with the molding material, the temperature at the time of sol, the weight, and the temperature at the time of product release.
In terms of temperature difference, the smaller the temperature
difference, the more ice water flow is required to carry away the
same heat, and the smaller the ice water flow is required
